研究生: |
李根漢 Ken-han Lee |
---|---|
論文名稱: |
版式鋼構綠建築之開發
以低層開放住宅系統為例 The Development of a Green Steel-Panel System for Low Rise Residential Open Building |
指導教授: |
魏浩揚
Hao-yang Wei |
口試委員: |
李政憲
Chen-Hsien Lee 杜功仁 Kung-jen Tu |
學位類別: |
碩士 Master |
系所名稱: |
設計學院 - 建築系 Department of Architecture |
論文出版年: | 2008 |
畢業學年度: | 96 |
語文別: | 中文 |
論文頁數: | 154 |
中文關鍵詞: | 開放建築 、綠建築 、版式構法 、系統房屋 |
外文關鍵詞: | Open building, green architecture, panel construction, system house |
相關次數: | 點閱:321 下載:11 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
住宅是台灣最常見的建築類型,也是生活的主要場域。長久以來,由於台灣住宅設計普遍缺乏開放建築的思維,也漠視環保節能的重要性,以致城鄉建築逐漸充斥著高耗能、高排放的「混凝土叢林」。這些缺乏彈性的住宅系統,不但使居住者在建築生命週期的起點無法參與空間形成的決策過程,更造成室內外更修改建時諸如噪音、震動、粉塵、廢棄物等等環境衝擊問題。迫使吾人不得不重新思考新的住宅系統解答,以滿足當代台灣住宅系統的永續發展需求。
版式框架系統鋼構以其高預製度、短工期、高精度、合理化、高組合性、易拆組、低耗能、低排放…等等優點,為歐美及日本常用的住宅系統,不啻為提供解決本土住宅當前問題之一種可能的構法。
有鑑於此,本研究以開發「低層透天住宅系統」為目標,探討「開放建築」及「綠建築」手法應用於本土大量客製化住宅的可能性,進而在台灣開放性需求與現有營造技術的限制下,建構具本土特色之開放性版式系統房屋。其主要操作方法為藉開放建築理論的探討,尋求版式鋼構作為構築系統之最佳解,藉此建立一套開放性版式構法的系統規則,依此進行低層住宅的系統房屋原型之設計操作,並進而發展各種建築彈性格局的可能性。論文主要內容如下:
1、 開放性空間計畫:藉由模矩計畫及哈布瑞肯的SAR理論之探討,擬定本設計的開放性空間計畫,作為平面格局發展的基準系統。
2、 版式構法型錄建立:探究版式構造系統的組構方式,作層級化的統整歸納,有助於構法設計之參考。
3、 版式構法系統房屋設計:依前述所擬定之系統計畫,並因應台灣風土環境,建構版式系統房屋之原型設計,統整結構系統、管道設備、構造細部及施工計畫,以開發完整的本土化版式構造系統。
4、 永續建築發展:將綠建築手法應用於本設計,涵括被動式設計手法及主動式設備系統,以減少居住所需耗能。
5、 可變性延伸操作:依據本設計的開放系統準則,對內部可變性、外部可變性、版塊置換進行延伸設計,開發各種格局變化的可能性。
大量客製化的版式系統房屋已在國外發展許久,但台灣對此構法技術仍十分陌生。本研究經評估探討,認為此開放性構造系統對本土現況問題之解決,無論在建築生命週期的各個期程均有相當大的環保助益。後續可進行實際建案之施作,並針對物理環境控制、開放性構法之再生利用作追蹤性的研究操作,以建立完整可行之版式綠建築系統房屋。
Residential buildings are the most common building type in Taiwan and provide the main living space for people. Most of this residential stock is not suited to demands for future internal adaptability to meet changing life-styles and user preferences. Nor does the housing stock meet anticipated higher energy efficiency standards. The lack of awareness of these issues has resulted in a large number of rigid concrete housing units (both single family and multi-family) which cause high energy consumption and CO2 emissions and waste. Occupants’ individual preferences are not considered. Therefore, the issues of pollution, such as noise, vibration, dust and waste will be major problems during the inevitable refurbishment work, because of the inflexibility of the building design and obsolete construction methods. It is therefore critical to develop a new house system to meet the requirement of sustainable development in Taiwan.
This study attempts to develop a steel-panel system for low-rise residential buildings by establishing a prototype. In addition, it attempts to discuss the possibility of mass-production of the elements for customized houses, applying the concepts of open building and green building in Taiwan. Steel-panel systems have many advantages such as pre-fabrication, quick erection and dismantling, high accuracy, high flexibility, low energy consumption and low emissions during production. A variety of these systems is widely applied in Europe, America and Japan, and is a possible system for meeting some of the current residential construction market demands and to raise the standards of residential construction in Taiwan.
The contents of this study are as follows:
1、 Development of a typical base building plan and demonstration that it can accommodate a variety of possible layouts based on Open Building principles .
2、 Panel construction catalogue: a guide to construction design by use of a hierarchy of panel construction elements and methods.
3、 Panel-system house design: based on steps 1, 2 and real conditions of Taiwan, the study illustrates a prototype of a steel panel house system with structural, system, piping, equipment, and construction details and plans.
4、 Sustainable building development: applied green building approach including passive and active methods to reduce energy consumption.
5、 Demonstrate the variety of applications of the system in different building types and sites including internal layout variants and external changeability.
The results of this study show that open building can eliminate a number of key problems in the design and construction and subsequent adaptation of houses, thus improving the environment in Taiwan. Follow-up studies should focus on the construction of full-scale prototypes including installation of physical-environment controls, open construction methods and long-term research to encourage development of green steel-panel systems in Taiwan.
中文部分
1. 王明蘅 譯。衍異:開放住宅的系統設計。建築與文化出版社,2008。
2. 財團法人成大建築文教基金會。鋼構建築概論。科技圖書,2001。
3. 潘吉齡。輕型鋼構住宅建築與結構細部設計整合之研究。內政部建築研究所,2003。
4. 鄭政利,建築基地保水貯集技術設計規範與法制化之研究子計畫二:建立「雨水貯集利用」電腦輔助設計套裝軟體。內政部建築研究所,2006。
5. 李乾朗。台灣古建築圖解事典。遠流出版事業股份有限公司,2003。
6. 胡湘玲。太陽房子。天下遠見出版股份有限公司,2006。
7. 林憲德。熱濕氣候的綠色建築。詹式書局,2003。
8. 李虹茂。從傳統住宅構法轉化之板片式本土系統房屋設計。國立台灣科技大學建築系碩論,2007
9. 程威龍。開放式辦公建築系統設計之操作-以台灣科技大學國際大樓增建案為例。國立台灣科技大學建築系碩士論文,2006。
10. 楊逸詠。建築模矩配合應用手冊。中華民國建築師公會全國聯合會,1986。
11. 陳相如。可動隔間牆構法開發研究。國立台灣科技大學建築系碩士論文,2004。
12. 林蓮蕊。積木理論在開放式住宅系統之運用。國立台灣科技大學建築系碩論文,2006。
13. 魏浩揚、杜功仁。開放式建築填充體關鍵技術之研發。內政部建築研究所,2005。
外文部分
1. Habraken, N. J.: Variations: the systematic design of supports, Cambridge ,Mass. MIT, 1976.
2. F.Hart ,W.Henn , H.Sontag ; Multi-storey buildings in steel ; Collins,1985.
3. Tichelmann , Häuser in Stahl-Leichtbauweise ,Stahl-Informations-Zentrum,2002.
4. Konrad Wachsmann ,The turning point of building :structure and design, Reinhold Pub,1961.
5. Hegger, M., Fuchs, M., Stark, Th. and Zeumer, M., Energy Atlas. Birkäuser, München.,2008.
6. Konrad Weller,Industrielles2, W. Kohlhammer,1989.