簡易檢索 / 詳目顯示

回結果列表
研究生： 羅志中
Chih-Chung Lo
論文名稱： 基於售價為保固期的函數之不完美生產系統的最佳生產與保固期之研究
Optimal production run length and warranty period for an imperfect production system under selling price dependent on warranty period
指導教授： 陳正綱
Cheng-Kang Chen
口試委員: 洪政煌
none
楊維寧
none
洪大為
none
黃宇翔
none
學位類別： 博士
Doctor
系所名稱： 管理學院 - 資訊管理系
Department of Information Management
論文出版年： 2016
畢業學年度： 104
語文別： 英文
論文頁數： 55
中文關鍵詞： 定價 、不完美生產系統 、免費替換/維修保固策略
外文關鍵詞： Pricing, Imperfect production system, Free replacement/repair warranty
相關次數： 點閱：198  下載：11 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本論文延伸現有文獻並考慮產品售價是保固期的函數，此產品要銷售時就會考慮因保固所發生的成本，藉由不同的保固期給予不同的售價，且產品的保固策略為免費替換/維修策略，表示使用者在保固期內所產生的任何維修費用均為免費。
    本論文探討的產品其生命週期函數為指數函數。利用此假設，我們可以藉由生產與保固期的最佳化來找出每個產品的最大利潤。基於此目的的數學模型，我們試著給予數學上的性質和定理找出一個有效率的演算法來找出最佳解。最後我們會提供一些範例來驗證我們提出的數學性質和理論，並給予本論文在管理上的意涵和貢獻。

    This paper extends the extant literature to consider that the selling price of the product sold with warranty policy is a function of the length of the warranty period for an imperfect production system. A product under a free replacement/repair warranty policy is considered and the lifetime distribution of the product is assumed to be exponentially distributed. We seek to maximize the total profit per item through optimal determinations of the production run length and the warranty period. Based on the proposed mathematical model, we will derive some Lemmas and the Propositions to carry out an efficient solution procedure to determine the optimal warranty period and production run length. The numerical examples are given to illustrate the features of the proposed maximizing profit model and to show all of the
    possible cases of the solution procedure.

    摘要 I Abstract II 致謝 III Content IV List of Figures VI List of Tables VII Chapter 1 : Introduction 1 Chapter 2 : Literature Review 4 Chapter 3 : Mathematical Model 8 Chapter 4 : Solution Procedure for the Mathematical Model 14 Chapter 5 : Numerical Examples 37 Chapter 6 : Concluding Remarks 49 References 51 Publication List 55

    1. Amato, H.N. and Anderson, E.E. (1976). Determination of warranty reserves, An extension. Management Science 22(13), 1391-1394.
    2. Blischke, W.R. and Murthy, D.N.P. (1992). Product warranty management – I, A taxonomy for warranty policies. European Journal of Operational Research 62(2), 127-148.
    3. Blischke, W.R. and Murthy, D.N.P. (1995). Product Warranty Handbook, Marcel Dekker, Inc. New York.
    4. Chang, F.M. and Chien, Y.H. (2012). Optimal Discrete-Time Periodic Replacement Policy For Repairable Products Under Free Minimal Repair Warranty. Asia-Pacific Journal of Operational Research 29(3), 1240020-1-1240020-14.
    5. Chen, C.K. and Lo, C.C. (2006). Optimal production run length for products sold with warranty in an imperfect production system with allowable shortages. Mathematical And Computer Modelling 44(3-4), 319-331.
    6. Chun, Y.H. and Tang, K. (1995). Determining the optimal warranty price based on the producer's and customers' risk preferences. European Journal of Operational Research 85(1), 97-110.
    7. Chung, K.J. and Hou, K.L. (2003). An optimal production run time with imperfect production processes and allowable shortages. Computer and Operations Research 30(4), 483-490.
    8. Esmaeili, M., Shamsi Gamchi, N. and Asgharizadeh, E. (2014). Three-level warranty service contract among manufacturer, agent and customer: A game-theoretical approach. European Journal of Operational Research 239(1), 177-186.
    9. Glickman, T.S. and Berger, P.D. (1976). Optimal price and protection period decisions for a product under warranty. Management Science 22(12), 1381-1390.
    10. Jung, K.M., Park, M. and Park, D.H. (2012). Optimal maintenance strategy for non-renewing replacement-repair warranty. Applied Stochastic Models in Business and Industry 28(6), 607-614.
    11. Kim, C.H. and Hong, Y. (1999). An optimal run length in deteriorating production process. International Journal of Production Economics 58(2), 183-189.
    12. Lee, H., Cha, J.H. and Finkelstein (2016). On information-based warranty policy for repairable products from heterogeneous population. European Journal of Operational Research 253(1), 204-215.
    13. Liu, B., Wu, J. and Xie, M. (2015). Cost analysis for multi-component system with failure interaction under renewing free-replacement warranty. European Journal of Operational Research 243(3), 874-882.
    14. Lo, S.T., Wee, H.M., Huang, W.C. (2007). An integrated production-inventory model with imperfect production processes and Weibull distribution deterioration under inflation. International Journal of Production Economics 106(1), 248-260.
    15. Menke, W.W. 1969. Determination of warranty reserves. Management Science 15(10), B542-549.
    16. Murthy, D.N.P. and Blischke, W.R. (1992a). Product warranty management – II, An integrated framework for study. European Journal of Operational Research 62(3), 261-281.
    17. Murthy, D.N.P. and Blischke, W.R. (1992b). Product warranty management – III, A review of mathematical models. European Journal of Operational Research 63(1), 1-34.
    18. Pearn, W.L., Su, R.H., Weng, M.W. and Hsu, C.H. (2011). Optimal production run time for two-stage production system with imperfect processes and allowable shortages. Central European Journal of Operations Research 19(4), 533-545.
    19. Rosenblatt, M.J. and Lee, H.L. (1986). Economic production cycles with imperfect production processes. IIE Transactions 18(1): 48-55.
    20. Sana, S.S., Goyal, S.K. and Chaudhuri, K. (2007). An imperfect production process in a volume flexible inventory model. International Journal of Production Economics 105(2), 548-559.
    21. Sana, S.S. (2010). An economic production lot size model in an imperfect production system. European Journal of Operational Research 201(1), 158-170.
    22. Sarkar, B. and Saren, S. (2016). Product inspection policy for an imperfect production system with inspection errors and warranty cost. European Journal of Operational Research 248(1), 263-271.
    23. Thomas, M.U. and Rao, S.S. (1999). Warranty economic decision models, A summary and some suggested directions for future research. Operations Research 47(6), 807-820.
    24. van der Heijden, M. and Iskandar, B.P. (2013). Last time buy decisions for products sold under warranty. European Journal of Operational Research 224(2), 302-312.
    25. Wee, H. M. and Widyadana G.A. (2013). A production model for deteriorating items with stochastic preventive maintenance time and rework process with FIFO rule. Omega 41(6), 941-954
    26. Wu, C.C., Lin, P.C. and Chou, C.Y. (2006). Determination of price and warranty length for a normal lifetime distributed product. International Journal of Production Economics 102(1), 95-107.
    27. Wu, C.C., Chou, C.Y. and Huang, C. (2009). Optimal price, warranty length and production rate for free replacement policy in the static demand market. Omega 37(1), 29-39.
    28. Yeh, R.H., Ho, W.T. and Tseng, S.T. (2000). Optimal production run length for products sold with warranty. European journal of operational research 120(3), 575-582.
    29. Yeh, R.H., Chen, M.Y. and Lin, C.Y. (2007). Optimal periodic replacement policy for repairable products under free–repair warranty. European Journal of Operational Research 176(3), 1678-1686.
    30. Zhou, Z., Li, Y. and Tang, K. (2009). Dynamic pricing and warranty policies for products with fixed lifetime. European Journal of Operational Research 196(3), 940-948.

    QR CODE