簡易檢索 / 詳目顯示

研究生: 廖士榤
Shi-jie Liao
論文名稱: 5 kW最大功率追蹤轉換器研製
Study and Implementation of a 5-kW Maximum Power Point Tracking Converter
指導教授: 羅有綱
Yu-kang Lo
邱煌仁
Huang-jen Chiu
口試委員: 林景源
Jing-yuan Lin
學位類別: 碩士
Master
系所名稱: 電資學院 - 電子工程系
Department of Electronic and Computer Engineering
論文出版年: 2014
畢業學年度: 102
語文別: 中文
論文頁數: 76
中文關鍵詞: 最大功率追蹤擾動觀察法升壓型直流/直流轉換器
外文關鍵詞: Maximum power point tracking, perturbation and observation method, DC/DC boost converter
相關次數: 點閱:274下載:9
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 由於太陽能電池輸出功率會受日照強度及環境溫度的影響而有所改變,使得太陽能電池並非隨時都操作在最大功率點上,導致許多能源的浪費。為了讓太陽能電池能夠隨時都操作在最大功率輸出,達到最佳的發電效益,本論文以TMS320F28035數位信號處理器為基礎,研製一台應用於高壓光伏陣列之5 kW最大功率追蹤升壓型直流/直流轉換器,其演算法採用擾動觀察法,並設計多組輸出輔助電源供給週邊電路,最後經由實作測試與結果驗證此系統的可行性。


    Owing to the output power of a solar cell varies with illumination strength and environmental temperature, the solar cell usually cannot operate at the maximum power point all the time. Therefore, a lot of energy is wasted. In order to operate the solar cell at maximum power point at anytime and to achieve optimized electricity generation efficiency, this thesis studies and implements a 5-kW DC/DC boost converter with maximum power point tracking function for high-voltage photovoltaic arrays based on a digital signal processor (DSP), TMS320F28035. The perturbation and observation method (P&O) is adopted as the control algorithm. An multi-output auxiliary power supply is designed to provide energy for the peripheral circuits. Finally, the feasibility of the presented system is verified by the tests and the experimental results.

    摘 要 i Abstract ii 誌 謝 iii 目 錄 v 圖索引 viii 表索引 xii 第一章 緒論 1 1.1 前言 1 1.2 研究動機與目的 3 1.3 內容編排 4 第二章 太陽能電池介紹 6 2.1 太陽能電池原理 6 2.2 太陽能電池種類 7 2.3 太陽能電池特性 9 第三章 太陽能最大功率追蹤 15 3.1 最大功率追蹤技術 15 3.1.1 擾動觀察法 15 3.1.2 電壓回授法 18 3.1.3 增量電導法 18 3.1.4 直線近似法 21 3.1.5 實際量測法 22 3.1.6 三點權位比較法 22 3.2 各種演算法之比較 25 第四章 系統架構與硬體電路設計 27 4.1 整機系統架構 27 4.2 升壓式轉換器之動作原理 28 4.3 太陽能最大功率追蹤器電路設計 31 4.3.1 輸入電感設計 32 4.3.2 功率開關設計 34 4.3.3 輸出二極體設計 35 4.3.4 輸出電容設計 36 4.4 輔助電源電路設計 37 4.4.1 變壓器設計 39 4.4.2 功率開關設計 41 4.4.3 輸出二極體設計 42 4.4.4 輸出電容設計 43 第五章 數位系統分析與流程規劃 45 5.1 數位信號處理器TMS320F28035之簡介 45 5.1.1 TMS320F28035之功能 45 5.1.2 ADC模組介紹 47 5.1.3 ePWM模組介紹 49 5.1.4 中斷處理程序 51 5.2 軟體流程規劃 51 第六章 實驗數據與波形 54 6.1 最大功率追蹤量測 54 6.2 輔助電源量測 67 第七章 結論與未來研究方向 71 7.1 結論 71 7.2 未來研究方向 71 參考文獻 73

    [1] 方良吉,2010年能源產業技術白皮書,第一版,經濟部能源局,2010年4月。
    [2] 綠色能源產業資訊網,Networks[Online].Available: http: //www.
    taiwangreenenergy.org.tw/?ClassID=851783FDC7F8930E。
    [3] 姚興佳、劉國喜、朱家玲、袁振宏、張亮、王益全、姚建曦,可再生能源及其發電技術,初版,科學出版社,2010年7月。
    [4] 洪志明,再生能源發電,初版,全華出版社,2013年1月。
    [5] 張品全,科學發展專題報導「太陽電池」,2002年1月。
    [6] 馬小康,(2008年7月4日),Networks [Online]. Available: http:// www.ctci.org.tw/public/Attachment/0319145514587.pdf。
    [7] Siemens Solar, “Solar Module SP75,” Datasheet, 1998.
    [8] Y. Jung, J. So, G. Yu, and J. Choi, “Improved Perturbation and Observation Method (IP&O) of MPPT Control for Photovoltaic Power Systems,” PVSC, pp. 1788-1791, Jan. 2005.
    [9] I. Abdalla, L. Zhang, and J. Corda, “Voltage-Hold Perturbation & Observation Maximum Power Point Tracking Algorithm (VH-P&O MPPT) for Improved Tracking over the Transient Atmospheric Changes,” EPE, pp.1-10, 30 Aug. 2011-01 Sept. 2011.
    [10] N. Femia, G. Petrone, G. Spagnuolo, and M. Vitelli, “Optimizing Duty-Cycle Perturbation of P&O MPPT Technique,” PESC, pp. 1939-1944, June 2004.
    [11] X. Liu, “An Improved Perturbation and Observation Maximum Power Point Tracking Algorithm for PV Arrays,” PESC, pp. 2005-2010, June 2004.
    [12] Z. A. Salameh, F. Dagher, and W. A. Lynch, “Step-Down Maximum Power Point Tracker for Photovoltaic System,” Solar Energy, vol. 46, no. 1, pp. 279-282, 1991.
    [13] T. Esram and P. L. Chapman, “Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques,” IEEE Transactions on Energy Conversion, vol. 22, no. 2, pp. 439-449, June 2007.
    [14] J. H. Lee, H. S. Bae, and B. H. Cho, “Advanced Incremental Conductance MPPT Algorithm with a Variable Step Size,” EPE-PEMC, pp. 603-607, 30 August. 2006-01 Sept. 2006.
    [15] K. H. Hussein, I. Muta, T. Hoshino, and M. Osakada, “Maximum Photovoltaic Power Tracking: an Algorithm for Rapidly Changing Atmospheric Condition,” IEE Proceedings- Generation, Transmission and Distribution, vol. 142, no. 1, pp. 59-64, Jan. 1995.
    [16] C. T. Pan, J. Y. Chen, C. P. Chu, and Y. S. Huang, “A Fast Maximum Power Point Tracker for Photovoltaic Power Systems,” IECON, pp. 390-393, 29 Nov. 1999-03 Dec. 1999.
    [17] N. Mutoh, M. Ohno, and T. Inoue, “A Method for MPPT Control While Searching for Parameters Corresponding to Weather Conditions for PV Generation Systems,” IEEE Transactions on Industrial Electronics, vol. 53, no. 4, pp. 1055-1065, June 2006.
    [18] V. R. Scarpa, S. Buso, and G. Spiazzi, “Low-Complexity MPPT Technique Exploiting the PV Module MPP Locus Characterization,” IEEE Transactions on Industrial Electronics, vol. 56, no. 5, pp. 1531-1538, May 2009.
    [19] 吳財福、張健軒、陳裕愷,太陽能供電與照明系統綜論,初版,全華出版社,2000年1月。
    [20] Y. T. Hsiao and C. H. Chen, “Maximum Power Tracking for Photovoltaic Power System,” 37th IAS Annual Meeting, vol. 2, pp. 1035-1040, Oct. 2002.
    [21] Texas Instruments Inc., “TMS320F28035 Piccolo Microcontrollers,” Datasheet, 2012.
    [22] Texas Instruments Inc., “TMS320F28030/28031/28032/28033/
    28034/28035 Piccolo Microcontrollers, rev B,” Datasheet, 2009.
    [23] 蔡瀚章,智慧型控制數位化鋰錳電池充電器之研製,國立中央大學電機工程學系碩士論文,2011年。
    [24] Texas Instruments Inc., “TMS320x2802x, 2803x Piccolo Analog-to-Digital Converter (ADC) and Comparator, rev B,” Datasheet, 2009.
    [25] Texas Instruments Inc., “TMS320x2802x,2803x Piccolo Enhanced Pulse Width Modulator (ePWM) Module, rev C,” Datasheet, 2009.
    [26] Texas Instruments Inc., “TMS320F2803x Piccolo System Control and Interrupts, rev A,” Datasheet, 2009.

    無法下載圖示 全文公開日期 2019/07/17 (校內網路)
    全文公開日期 本全文未授權公開 (校外網路)
    全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
    QR CODE