研究生: |
林孟軒 Meng-xuan Lin |
---|---|
論文名稱: |
雷射激發單晶螢光晶體發光行為之探討 Study of the Fluorescence Behavior of Single Crystal Phosphor Excited by Laser |
指導教授: |
李宗憲
Tsung-Xian Lee |
口試委員: |
李宗憲
馬仕信 蘇忠傑 |
學位類別: |
碩士 Master |
系所名稱: |
應用科技學院 - 色彩與照明科技研究所 Graduate Institute of Color and Illumination Technology |
論文出版年: | 2021 |
畢業學年度: | 109 |
語文別: | 中文 |
論文頁數: | 60 |
中文關鍵詞: | 藍光雷射二極體 、單晶螢光晶體 、熱淬滅 、布魯斯特角 |
外文關鍵詞: | Blue laser diode, Single crystal phosphor, Thermal quenching, Brewster’s angle |
相關次數: | 點閱:170 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
多篇文獻指出,高功率藍光雷射激發螢光物質時,被照射區域會產生極高的溫度,使螢光物質發生熱淬滅現象,因此搭配雷射光源的螢光物質需要具備在高溫下還可保持一定的光轉換效率的特性,單晶螢光晶體就是其中一種具備以上特性的螢光物質之一。單晶螢光晶體具有極高的熱穩定性和光轉換效率,非常適合搭配高功率藍光雷射,在未來雷射白光照明應用扮演關鍵角色。然而單晶螢光晶體的折射率高於目前螢光粉封裝用的矽膠折射率,導致單晶螢光晶體的介面反射高於傳統螢光片,且單晶螢光晶體表面光滑、透明度高,使入射且未被吸收的藍光直接穿透而不會在內部發生散射,導致單晶螢光晶體的藍光光源利用率低於傳統螢光片。
本論文針對單晶螢光晶體探討其轉換效率、光源利用率、溫度及不同入射面對螢光特性的影響,並提出利用布魯斯特角解決單晶螢光晶體因折射率過高導致的高反射率,經實驗後發現,此方法可有效的提升藍光雷射光源的利用率,將藍光光源的利用率提升至接近100%。
More paper points out that high power blue laser diode excitation fluorescence material, illumination area will produce high temperature, thermal quenching phenomenon in the phosphor material, therefore with laser light source of phosphor material need to be at high temperatures can also maintain the characteristics of light conversion efficiency, the single crystal phosphor is one of the above characteristics of one of the phosphor material. Single crystal phosphor with high thermal stability and optical conversion efficiency are ideal for high-power blue lasers, which will play a key role in future laser white lighting applications. However single crystal phosphor refractive index is higher than the phosphor powder encapsulation of silicone refractive index, and lead to the single crystal phosphor interface reflection is higher than conventional fluorescence, and the single crystal phosphor surface is smooth, high transparency, the incidence and blue which are not absorbed directly through without scattering in internal, lead to the single crystal phosphor blue light utilization ratio is lower than traditional phosphor.
This paper in view of the single crystal phosphor to explore its conversion efficiency, the utilization rate of light, temperature and the influence of different incident in the face of the fluorescence characteristics, and put forward by using brewster Angle to solve the single crystal phosphor of high reflectivity, as a result of high refractive index by experiment and found that this method can effectively improve the utilization rate of blue laser light source, will increase the utilization ratio of blue light to near 100%.
[1] Yang, Jingjing, et al. "Modeling phosphor-conversion white light source using blue laser diode." 2015 International Conference on Optoelectronics and Microelectronics (ICOM). IEEE(2015).
[2] Shchekin, Oleg B, et al. "Excitation dependent quenching of luminescence in LED phosphors." physica status solidi (RRL)–Rapid Research Letters 10.4 (2016): 310-314.
[3] Kim, Min-Ho, et al. "Origin of efficiency droop in GaN-based light-emitting diodes." Applied Physics Letters 91.18 (2007): 183507.
[4] Kioupakis, Emmanouil, et al. "Indirect Auger recombination as a cause of efficiency droop in nitride light-emitting diodes." Applied Physics Letters 98.16 (2011): 161107.
[5] Iveland, Justin, et al. "Direct measurement of Auger electrons emitted from a semiconductor light-emitting diode under electrical injection: identification of the dominant mechanism for efficiency droop." Physical review letters 110.17 (2013): 177406.
[6] David, Aurélien,et al. "Droop in InGaN light-emitting diodes: A differential carrier lifetime analysis." Applied Physics Letters 96.10 (2010): 103504.
[7] Nakamura, Shuji. "Nobel Lecture: Background story of the invention of efficient blue InGaN light emitting diodes." Reviews of Modern Physics 87.4 (2015): 1139.
[8] Gatdula, Robert, et al. "Solid state lighting with blue laser diodes."
Online : http://www. winlab. rutgers. edu/~ crose/capstone12/entries/
SolidStateLightingwBlueLaser Diodes-Revised. (2015).
[9] Krasnoshchoka, Anastasiia, et al. "Investigation of saturation effects in ceramic phosphors for laser lighting." Materials 10.12 (2017): 1407.
[10] Fulmek, Paul, et al. "On the thermal load of the color‐conversion elements in phosphor‐based white light‐emitting diodes." Advanced Optical Materials 1.10 (2013): 753-762.
[11] Luo, Xiaobing, et al. "Phosphor self-heating in phosphor converted light emitting diode packaging." International Journal of Heat and Mass Transfer 58.1-2 (2013): 276-281.
[12] Bachmann, Volker,et al. "Temperature quenching of yellow Ce3+ luminescence in YAG: Ce." Chemistry of Materials 21.10 (2009): 2077-2084.
[13] Song, Young Hyun, et al. "High power laser-driven ceramic phosphor plate for outstanding efficient white light conversion in application of automotive lighting." Scientific reports 6.1 (2016): 1-7.
[14] Hollemann, Guenter, et al. "RGB lasers for laser projection displays." Projection Displays 2000: Sixth in a Series. Vol. 3954. International Society for Optics and Photonics, 2000.
[15] Kasazumi, Ken'ichi, et al. "A practical laser projector with new illumination optics for reduction of speckle noise." Japanese journal of applied physics 43.8S (2004): 5904.
[16] Masui, Shingo, et al. "A white light source excited by laser diodes." Electronics and Communications in Japan 98.5 (2015): 23-27.
[17] Ma, Yupu, et al. "Small-divergent-angle uniform illumination with enhanced luminance of transmissive phosphor-converted white laser diode by secondary optics design." Optics and Lasers in Engineering 122 (2019): 14-22.
[18] Ma, Yupu, et al. "An optical-thermal model for laser-excited remote phosphor with thermal quenching." International Journal of Heat and Mass Transfer 116 (2018): 694-702.
[19] Yeh, Chih-Ting, et al. "Luminescence material characterizations on laser-phosphor lighting techniques." Optics express 27.5 (2019): 7226-7236.
[20] Kostić, S., et al. "Study of structural and optical properties of YAG and Nd: YAG single crystals." Materials Research Bulletin 63 (2015): 80-87.
[21] Faheem, Mohammad, and Kelvin Lynn. "Structural and Thermal Properties of Tb, Ce Doped Y2.97Gd0.03Al2Ga3O12 Single Crystals." American Journal of Analytical Chemistry 5.11 (2014): 695.
[22] Kang, T. W., et al. "Strong thermal stability of Lu3Al5O12: Ce3+ single crystal phosphor for laser lighting." Journal of Luminescence 191 (2017): 35-39.
[23] Salimian, A., et al. "Investigating the emission characteristics of single crystal YAG when activated by high power laser beams." ECS Journal of Solid State Science and Technology 5.10 (2016): R172.
[24] FluoroMaxPlus,https://www.horiba.com/en_en/products/detail/action/show/Product/fluoromax-1576/
[25] THORLABS-M100D, https://www.thorlabs.com/thorproduct.cfm?partnumber=PM100D
[26] OceanOpticesUSB2000+, https://www.oceaninsight.com/products/spectrometers/usb-series/