研究生: |
白承豐 Cheng-Feng Bai |
---|---|
論文名稱: |
二階段批次式熱浸鍍鋅鋁鎂合金相組成研究 The study of phase constitution after two-step batch hot-dipped Zn-Al-Mg alloy |
指導教授: |
鄭偉鈞
Wei-Chun Cheng |
口試委員: |
王朝正
Chaur-Jeng Wang 梁煥昌 Huan-Chang Liang |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 機械工程系 Department of Mechanical Engineering |
論文出版年: | 2022 |
畢業學年度: | 110 |
語文別: | 中文 |
論文頁數: | 113 |
中文關鍵詞: | 二階段熱浸鍍 、批次式熱浸鍍 、鋅鋁鎂合金 、共晶結構 、spinodal相分離 |
外文關鍵詞: | two-step hot-dipping, batch hot-dipping, Zn-Al-Mg alloy, eutectic structure, spinodal decomposition |
相關次數: | 點閱:266 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
[1] Y. Meng, G. Jiang, X. Ju, and J. Hao, “TEM study on the microstructure of the Zn-Al-Mg alloy”, Materials Characterization, 129 (2017) 336.
[2] C. Yao, H. Lv, T. Zhu, W. Zheng, X. Yuan, and W. Gao, ”Effect of Mg content on microstructure and corrosion behavior of hot dipped Zn-Al-Mg coatings”, Journal of Alloys and Compounds, 670 (2016) 239.
[3] R. F. Lynch, “Hot-Dip Galvanizing Alloys”, Journal of Metals (1987) 39.
[4] S. M. A. Shibli, B. N. Meena, and R. Remya, “A review on recent approaches in the field of hot dip zinc galvanizing process”, Surface & Coatings Technology, 262 (2015) 210.
[5] A. R. Marder, “The metallurgy of zinc-coated steel”, Progress in Materials Science, 45 (2000) 191.
[6] M. Saternus and H. Kania, “Effect of Mg on the formation of periodic layered structure during double batch hot dip process in Zn-Al bath”, Materials (2021) 1259.
[7] Y. Xie, A. Du, X. Zhao, R. Ma, Y. Fan, and X. Cao, “Effect of Mg on Fe-Al interface structure of hot–dip galvanized Zn-Al-Mg alloy coatings, Surface & Coatings Technology, 337 (2018) 313.
[8] Y. Chen, Y. Liu, H Tu, C. Wu, X. Su, and J. Wang, “Effect of Ti on the growth of the Fe-Al layer in a hot dipped Zn-6Al-3Mg coating”, Surface & Coatings Technology 275 (2015) 90.
[9] M. A. F. Romzi, J. Alias, and M. I. M. Ramli, “Effect of zinc (Zn) on the microstructure and corrosion behaviour of magnesium (Mg)”, Materials Today: Proceedings, 48 (2022) 1873.
[10] H. Wang, Y. C. Liu, H. Gao, and Z. Gao, “Effects of aging on microstructure evolution and mechanical properties of high-temperature Zn-4Al-3Mg solder”, Soldering & Surface Mount Technology, 26, 4 (2014) 203.
[11] G. J. Harvey and P. D. Mercer, “Aluminum-rich alloy layers formed during the hot dip galvanizing of low carbon steel”, Metallurgical Transactions, 4 (1973) 619.
[12] 鄭錦榮、羅俊雄和劉正章,「材料金相分析方法判斷連續式熱浸鍍鋅與批式熱浸鍍鋅產品的應用」,熱浸鍍鋅,63,(2018),3。
[13] N. Pistofidis, D. Chaliampalias, and G. Vourlias, “Study of growth mechanism of zinc hot dip galvanising coatings”, Surface Engineering, 25, 8, (2009) 594.
[14] C. E. Jordan and A. R. Marder, “Fe-Zn Phase formation in interstitial-free steel hot-dip galvanized at 450 °C”, Material Science, 32, 21 (1997) 5593.
[15] G. K. Mandal, R. Balasubramaniam, and S. P. Mehrotra, “Theoretical investigation of the interfacial reactions during hot-dip galvanizing of steel”, Metallurgical and Materials Transactions A, 40, 3, (2009) 637.
[16] B. Merkely, “The effect of zinc on cold rolling textures in cast aluminum”, Material Science and Engineering, (2016).
[17] H. Klang and R. Kiusalaas, “Solidification apects of zinc layer on continuously hot-dipped galvanised steel strip”, Proceedings of the Society for Analytical Chemistry, (1987) 361.
[18] J. Elvins, J. A. Spittl, and D. A. Worsley, “Microstructural changes in zinc aluminium alloy galvanising as a function of processing parameters and their influence on corrosion”, Corrosion Science, 47, 11 (2005) 2740.
[19] L. Li, Y. Liu, and H. Kao, “Phase formation sequence of high-temperature Zn-4Al-3Mg solder”, Journal of Science: Materials in Electronics, 24 (2013) 336.
[20] K. C. Yu, J. Li, X. Liu, J. G. Li, and X. H. Xue, “Microstructure of Hot-Dip Galvanized Zn-Al-Mg Alloy Coating”, J. Shanghai Jiaotong Univ., (2012).
[21] P. Liang, T. Tarfa, and J. A. Robinson, “Experimental investigation and thermodynamic calculation of the Al-Mg-Zn system”, Thermochimica Acta, 314, 1-2 (1998) 87.
[22] S. Schurz, G. H. Luckeneder, and M. Fleischanderl, “Chemistry of Corrosion Products on Zn-Al-Mg Alloy Coated Steel”, Corrosion Science, Volume 52, Issue 10, (2010) 3271.
[23] M. Dutta, A. K. Halder, and S. B. Singh, “Morphology and Properties of Hot-dip Zn-Mg and Zn-Mg-Al Alloy Coatings on Steel Sheet”, Surface and Coatings Technology, Volume 205, Issue 7, (2010) 2578.
[24] T. B. Massalski, “Binary alloy phase diagrams Volume 1”, American Society for Metals (1986).
[25] T. B. Massalski, “Binary alloy phase diagrams Volume 2”, American Society for Metals (1986).
[26] D. A. Porter, K. E. Easterling, and M . Y. Sherif “Phase Transformations in Metals and Alloys third edition”, CRC Press (2019)
[27] M. Ranjan, “Influence of silicon on galvanizing reactions in a zinc-aluminum bath”, University of Cincinnati, PhD thesis (2004).