研究生: |
陳彥仁 Yen-Jen Chen |
---|---|
論文名稱: |
應用於電子產品與行動通訊基地台之高速連接器設計 High Speed Connector Design for Applications in Electronic Products and Mobile Base Stations |
指導教授: |
楊成發
Chang-Fa Yang |
口試委員: |
魏冠雄
none 陳言成 none 馬自莊 none 王蒼容 none |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電機工程系 Department of Electrical Engineering |
論文出版年: | 2016 |
畢業學年度: | 104 |
語文別: | 中文 |
論文頁數: | 131 |
中文關鍵詞: | 高速連接器 、模態轉換 、superMHL 、USB Type-C 、AMC |
外文關鍵詞: | High-speed connector, Mode Conversion, superMHL, USB Type-C, AMC |
相關次數: | 點閱:367 下載:6 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本論文提出三款可使用於電子產品與行動通訊基地台之高速連接器,分別為superMHL, USB Type-C與AMC。本研究應用電磁模擬軟體分析高速連接器之訊號傳輸特性,並協同機構工程師進行機械特性調整,以研發符合規範之高速連接器。superMHL連接器為8K超高畫質解析度顯示器與周邊設備橋接之用,透過六通道全速傳輸可達36Gbps。第二款為USB Type-C連接器,可應用於智慧型手持裝置與輕薄筆電等,此產品設計乃根據目前最新規範,其單通道傳輸速率可達10Gbps。至於AMC連接器則可應用於基地台與相關資通訊設備,單通道傳輸速率為12.5Gbps,本研究針對其原始結構經濟效益不佳等問題進行結構修改,由時域反射阻抗與頻域散射參數量測來分析驗證之。本論文所提出三款高速連接器設計目前正導入相關產品應用中,將可提升高速訊號傳輸品質。
This thesis proposes three high speed connector designs for applications in electronic products and mobile base stations, respectively. First, introduced the basic structure of the connector and the industry commonly used process, than introduced the basic concept of the connector design through the transmission line theory. Electromagnetic analysis contains adjust impedance matching by using the time domain reflectometry and the frequency domain which include signal integrity, transmission loss, crosstalk, mode conversion, etc. This study using electromagnetic simulation software for structural analysis before manufacture and work in coordination with work in coordination with the mechanical engineer for tune the mechanical properties in order to develop the product which satisfy the specification. The first design, superMHL, which is connect between Ultra HD resolution displays and its peripherals, through 6 channels its full-speed transmission speed is up to 36Gbps. The second design is USB Type-C, which is design for smart phones or notebook, etc. This design is based on “USB 3.1 Gen 2,” which has a data rate of 10Gbps. In this thesis, specifically focus on the mode conversion problems and describe its solution. Last design is AMC connector which is design for the base station, its transmission speed is up to 12.5Gbps. This design is based on the original structure have poor economic problems, in this study was also conducted tine domain and frequency domain measurements, includes impedance, reflect coefficient, transmission coefficient and crosstalk. All the frequency measurements is based on the TRL calibration. The proposed concept of this thesis expect apply to future high-speed connector design.
[1] 產業價值鏈知識平台,「連接器產業鏈簡介」
[2] 許葆鑫,「應用於光纖與乙太網路之高速連接器」,國立臺灣科技大學,民104年7月。
[3] 正淩科技,「連接器接腳技術參考資料」。
[4] D.M. Pozar, Microwave Engineering, 4rd ed, John Wiley & Sons, Nov. 2011.
[5] E. Bogatin, Signal Integrity-Simplified, Prentice Hall, 2003.
[6] H. Johnson, M. Graham, High-Speed Signal Propagation Advanced Black Magic, Prentice Hall PTR, 2003.
[7] Stephen H. Hall, Garrett W. Hall, and James A. McCall, High-Speed Digital System Design: A Handbook of Interconnect Theory and Design Practices, John Wiley & Sons, 2000.
[8] S. H. Hall, H. L. Heck, Advanced Signal Integrity for High-Speed Digital Design, John Wiley & Sons, 2009.
[9] 太克科技,「太克科技量測技術研討會課程資料」。
[10] H. W. OTT, Electromagnetic Compatibility Engineering, John Wiley & Sons, 2009.
[11] MHL, Introducing superMHL,[Online].Available
http://www.mhltech.org/technology.aspx
[12] KinnexA, “superMHL Receptacle Connector Right Angle, Top Mount SMT Type ,” Feb2016
[13] KinnexA, “superMHL Plug Connector Right Angle, Top Mount SMT Type ,” Feb2016
[14] MHL, superMHL Specification Version 1.0, Jan 2015
[15] Brian Rautio, John Connrod, “Comparing Microstrip and CPW Performance,” Microwave Journal China, 2012
[16] David K. Cheng, Fundamentals of Engineering Electromagnetics, Addison-Wesley,1993
[17] Polar Instruments, Microstrip transmission line structures,[Online].Available
http://www.polarinstruments.com/index.html
[18] Mark I. Montrose, EMC and the Printed Circuit Board: Design, Theory, and Layout Made Simple, IEEE Press, 2000
[19] George E. Ponchak, Donghoon Chun, Jong-Gawn Yook, Linda P. B. Katehi, “The Use of Metal Filled Via Holes for Improving Isolation in LTCC RF and Wireless Multichip Packages,” IEEE Transactions on Advanced Packing, VOL. 23, Feb 2008
[20] Rob Triggs, “USB Type C and 3.1 : cleaning up the confusion,” Nov 2015
[21] Pieter Arts, “USB 3.1 Gen 1& USB 3.1 Gen 2 Explained ,” Aug 2015
[22] Wikipedia, “USB,” [Online].Available
https://en.wikipedia.org/wiki/USB
[23] USB Implementers Forum, USB Type-C Cable and Connector Specification,[online].Available
http://www.usb.org/developers/usbtypec/
[24] USB Type-C Specification Release 1.1, April 2015
[25] 中興通訊股份有限公司,「改進型AMC直式壓接連接器技術規格書」。