研究生: |
胡捷荏 Chieh-Jen Hu |
---|---|
論文名稱: |
3D雷射掃瞄在室內設計工程上之運用 The Application of 3D Scan in the Interior Design and Construction |
指導教授: |
施乃中
Naai-Jung Shin |
口試委員: |
施宣光
Shen-Guan Shin 魏浩揚 Hao-Yang Wei |
學位類別: |
碩士 Master |
系所名稱: |
設計學院 - 建築系 Department of Architecture |
論文出版年: | 2005 |
畢業學年度: | 93 |
語文別: | 中文 |
論文頁數: | 125 |
中文關鍵詞: | 3D雷射掃瞄 、室內設計 、室內裝修 、設計資料數位化 |
外文關鍵詞: | design data digitization |
相關次數: | 點閱:261 下載:9 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
本研究是將3D長距離雷射掃瞄應用於室內裝修專案上。經由基地現場掃瞄而得之3D空間資訊,其具有相當的工作效率以及高精度的特性,將能夠減少圖說與實際狀況尺寸上的錯誤。因此,室內設計師藉此即可繪製出更精確的圖面,使之能更清楚的闡述其設計意圖並符合實際空間的狀況。
研究之目標在於提高室內設計圖說的正確性、增加施工作業的速度以及減少施工物料上不必要的浪費,並且定義在室內裝修產業中,雷射掃瞄的運用與傳統測繪記錄方式之不同處。
在本研究中,以台灣科技大學之綜合研究大樓的八樓裝修案為例,進行掃瞄,並建立現況、施工以及竣工之數位資料檔案,以作為研究分析之對象。
This research intends to apply a 3D long-range Laser Scan to interior rebuilt project. The Laser Scan get 3D data of space from a job-site in high precise and efficiency, reduce the dimensional error between drawing and the real world. Therefore the designer can produce an accurate drawing to describe his idea and fit to the object room. The study expects to improve the drawing accurate, to increase the speed of construction, to reduce the materials waste, to identify the different between the Laser Scan and traditional drafting methods.
In this research, we took samples before re-build, demolished, and after re-built, from eight floor of research building in the campus of Taiwan University of Science and Technology.
參考文獻
中文書目
1.吳秉軒,台北市住宅室內裝修專案之工程管理,碩士論文,國立台灣科技大學建築研究所,2004。
2.林信呈,台灣住宅整建行為模式之初探,碩士論文,國立台灣科技大學,1999。
3.許子凡,3ds max 4.X 完全剖析,文魁資訊股份有限公司,2001。
4.林承陽,3D雷射掃瞄在歷史建築數位模型之建構,碩士論文,國立台灣科技大學建築研究所,2004。
5.吳敏漳,3D雷射掃瞄於施工進度及流程記錄上之應用,碩士論文,國立台灣科技大學建築研究所,2004。
6.陳信宏,3D雷射掃瞄在施工變位分析上之應用,碩士論文,國立台灣科技大學建築研究所,2004。
7.曾義興、史元天,三維雷射掃瞄技術及其在工程測量上之應用。中期刊論文土木水利,2002
8.黃森田,3D雷射掃瞄在施工過程數位記錄上之應用,碩士論文,國立台灣科技大學建築研究所,2003。
9.董勝忠,室內設計就業實務(上冊)家具設計與施工圖繪製,名閣出版社,1999。
10.董勝忠,室內設計估價與施工實務,名閣出版社,1997。
11.高擎天、汪精銳,室內裝修工作手冊及材料使用指導原則之研究,內政部營建署,1998。
12.中華民國建築學會,室內裝修工作手冊,內政部營建署,1998。
13.林明成,室內裝修材料施工作業實務,詹氏書局,2005。
14.張枝坤,模組化櫥櫃系統研究,碩士論文,大同大學工業設計研究所,1999。
外文書目
1.Shih, N.J., “The Application of a 3D Scanner in the Representation of Building Construction Site”, Proceedings of International Symposium on Automation and Robotics in Construction, 19, International Symposium on Automation and Robotics in Construction (ISARC), National Institute of Standards and Technology, Gaithersburg, Maryland, September 23-25, pp.337-342, 2002b.
2.Mara, H. & Sablatnig, R., “3D-Vision Applied in Archaeology”, Forum Archaeologiae- Zeitschrift für klassische Archäologie 34 / III / 2005.
3.Rocchini, C., Cignoni, P., Montani, C., Pingi, P. and Scopigno, R., “A low cost 3D scanner based on structured light” A. Chalmers and T.-M. Rhyne, EUROGRAPHICS Computer Graphics Forum Volume 20, Issue 3 2001. http://vcg.isti.cnr.it/publications/papers/vcgscanner.pdf
4.HAVERINEN, J., and RÖNING, J., “A 3-D Scanner Capturing Range And Color: Design and Calibration”, Vision Interface(VI’2000), May 14-17 Montréal, Quebec, Canada, pp. 378-381, 2000.
5.Shih, N.J., Wu, M.C., and Kunz, J., “The Inspections of As-built Construction Records by 3D Point Clouds”, CENTER FOR INTEGRATED FACILITY ENGINEERING Working Paper #090 2004.”
6.Cyra Technologies, Inc., Cyclone user’s manual, Oakland, 2000.
7.Octree Corporation, Author User’s Guide, PC Version Release 2.4, 2004.
網站
1.Leica Geosystems HDS, Inc., http://hds.leica-geosystems.com/, 2004.
2.MENSI - 3D laser scanner Inc, http://www.mensi.com/, 2004.
3.RIEGL 3D Scanner Inc, http://www.riegl.co.at/, 2004.
4.I-SiTE 3D Laser Scanning Inc, http://www.isite3d.com/, 2004.
5.Callidus Precision Systems GmbH, http://www.callidus.de/, 2004.
6.Optech Inc, http://www.optech.ca/, 2004.
7.InnovMetric Software Inc., “3D Survey of the Metropolitan Railway of Seville, Spain.”, Case Study of InnovMetric Software Inc. http://www.innovmetric.com/,2003.
8.BOEHLER, W., MARBS, A., “3D Scanning Instruments.” http://scanning.fh-mainz.de, 2002.
9.陳乃城,營建管理淺論,http://www.arch.net.tw/spc/spc-1/spc001.htm,1996