簡易檢索 / 詳目顯示

回結果列表
研究生： 黃婉婷
Wan-Ting Huang
論文名稱： 考慮新品與再製品的品質與價格競爭之閉環式供應鏈
Optimal Remanufacturing Strategies in a Closed-Loop Supply Chain with Price and Quality Competition between New and Remanufactured Products
指導教授： 陳正綱
Cheng-Kang Chen
口試委員: 洪大為
Ta-Wei Hung
曹譽鐘
Yu-Chung Tsao
學位類別： 碩士
Master
系所名稱： 管理學院 - 資訊管理系
Department of Information Management
論文出版年： 2015
畢業學年度： 103
語文別： 英文
論文頁數： 84
中文關鍵詞： 閉環式供應鏈 、回收再製 、價格競爭 、品質競爭
外文關鍵詞： Price competition, Quality competition
相關次數： 點閱：240  下載：1 
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報

    • 本論文建置三個分離式閉環式供應鏈探討供應鏈成員在不同回收再製模式與需求競爭下的決策。透過建置數學模式，找出供應鏈成員之最佳利潤與再製策略。本篇論文與其他文獻最大不同點：(1) 新品與再製品品質不同,(2)新品與再製品之間存在價格與品質之競爭，共有四種情況分別是：(1)存在價格與品質競爭、(2)只有價格競爭、(3)只有品質競爭和(4)不存在競爭。此外，我們假設不同階層從事Stackelberggame。最後給予結論與未來可能發展之研究。

    In this paper, we propose three decentralized closed-loop supply chain models with remanufacturing to examine the supply chain members decisions under different models and the competition scenarios. We find the optimal profits and remanufacturing policies of supply chain members through developing the mathematical formula. In contrast to previous works : (1) The quality of remanufactured products is not as good new products, (2) The
    new products and remanufactured products compete with each other at the retailing prices and the quality levels. Four competition scenarios are : (1) both price and quality competition, (2) competition on price only, (3) competition on quality only and (4) the absence of both competition. We assumed that supply chain members are engaging in a Stackelberg game in
    the two–echelon supply chain. Further, we give some conclusions and the extensions of this research.

    致謝 ......................................................................................................................... I 摘要 ....................................................................................................................... II Abstract ...................................................................................................................... III Table of Contents ................................................................................................................ IV List of Figures ...................................................................................................................... VI List of Tables ...................................................................................................................... IX Chapter 1、 Introduction .................................................................................................... 1 Chapter 2、 Literature Review and Model Assumptions and Notation ............................. 3 2.1 Literature Review ........................................................................................................ 3 2.2 Model Assumptions ..................................................................................................... 6 2.3 Notation ....................................................................................................................... 7 Chapter 3、 Model M – closed-loop supply chain with manufacturer collecting and remanufacturing used products .............................................................................................. 9 3.1 Description of Model M .............................................................................................. 9 3.2 Solution Procedure of Model M ................................................................................ 11 3.3 Different Competition Scenarios of Model M ........................................................... 16 3.4 Comparison of Model M under different competition scenarios ............................... 21 3.4.1 The impact of quality investment cost on chain member’s equilibrium profits.. 21 3.4.2 The impact of recycling cost on chain member’s equilibrium profits ................ 24 Chapter 4、 Model R – closed-loop supply chain with retailer collecting and remanufacturing used products ............................................................................................ 28 V 4.1 Description of Model R ............................................................................................. 28 4.2 Solution Procedure of Model R ................................................................................. 30 4.3 Different Competition Scenarios of Model R ............................................................ 36 4.4 Comparison of Model R under different competition scenarios ................................ 41 4.4.1 The impact of quality investment cost on chain member’s equilibrium profits.. 41 4.4.2 The impact of recycling cost on chain member’s equilibrium profits ................ 44 Chapter 5、 Model 3P－closed-loop supply chain with third-party collecting and remanufacturing used products ............................................................................................ 47 5.1 Description of Model 3P ............................................................................................ 47 5.2 Solution Procedure of Model 3P ................................................................................ 49 5.3 Different Competition Scenarios of Model 3P .......................................................... 54 5.4 Comparison of Model 3P under different competition scenarios .............................. 59 5.4.1 The impact of quality investment cost on chain member’s equilibrium profits.. 59 5.4.2 The impact of recycling cost on chain member’s equilibrium profits ................ 62 Chapter 6、 Conclusion and Future Research ................................................................. 66 Reference ...................................................................................................................... 68 Appendix ...................................................................................................................... 70

    1. Atasu, A., Sarvary, M., & Van Wassenhove, Luk N. (2008). Remanufacturing as a
    marketing strategy. Management Science, 54(10), 1731-1746.
    2. Arya, A., & Mittendorf, B. (2013). Managing strategic inventories via manufacturer-toconsumer
    rebates. Management Science, 59(4), 838-818.
    3. Choi, T. M., Li, Y., & Xu, L. (2013). Channel leadership, performance and coordination
    in closed loop supply chains. International Journal of Production Economics, 146, 371-
    380.
    4. Ferrer, G., & Swaminathan, Jayashankar M. (2006). Managing new and remanufactured
    products. Management Science, 52(1), 15-26.
    5. Ghosh, D., & Shah, J. (2012). A comparative analysis of greening policies across supply
    chain structures. International Journal of Production Economics, 135, 568-583.
    6. Ghosh, D., & Shah, J. (2015). Supply chain analysis under green sensitive consumer
    demand and cost sharing contract. International Journal of Production Economics, 164,
    319-329.
    7. Hong, I., & Yeh, J. (2012). Modeling closed-loop supply chains in the electronics
    industry : A retailer collection application. Transportation Research Part E, 48, 817-829.
    8. Hong, M., Song, M., Lee, L. H., & Ching, W. K. (2013). Analysis for strategy of closedloop
    supply chain with dual recycling channel. International Journal of Production
    Economics, 144, 510-520.
    9. Hong, X., Wang, Z., Wang, D., & Zhang, H. (2013). Decision models of closed-loop
    supply chain with remanufacturing under hybrid dual-channel collection. International
    Journal of Advanced Manufacturing Technology, 68(5-8), 1851-1865.
    10. Ma, P., Wang, H., & Shang, J. (2013). Supply chain channel strategies with quality and
    marketing effort-dependent demand. International Journal of Advanced Manufacturing
    Technology, 144, 572-581.
    69
    11. Mahapatra, R. N., Biswal, B.B., & Mohanty, R.P. (2013). A modified reverse supply
    chain with remanufacturing for sustainable product cycle. International Journal of
    Supply Chain Management, 2(2), 51-59.
    12. Ma, W., Zhao, Z., & Ke, H. (2013) Dual-channel closed-loop supply chain with
    government consumption-subsidy. European Journal of Operational Research, 226,
    221-227.
    13. Savaskan, R. C., Bhattacharya, S., & Van Wassenhove, Luk N. (2004). Closed-loop
    supply chain models with product remanufacturing. Management Science, 50(2), 239-
    252.
    14. Shi, W., & Min, K. J. (2013). A study of product weight and collection rate in closedloop
    supply chains with recycling. IEEE Transactions on Engineering Management,
    60(2), 409-423.
    15. Wu, C. H., Chen, C. W., & Hiseh, C. C. (2012). Competitive pricing decisions in a twoechelon
    supply chain with horizontal and vertical competition. International Journal of
    Production Economics, 135, 265-274.
    16. Wu, C.H. (2012). Price and service competition between new and remanufactured
    products in a two-echelon supply chain. International Journal of Production Economics,
    140, 496-507.
    17. Yan, W., Xiong, Y., Xiong, Z., & Guo, N. (2015). Bricks vs. clicks : Which is better for
    marketing remanufactured products? European Journal of Operational Research, 242,
    434-444.

    無法下載圖示 全文公開日期 2020/06/17 (校內網路)
    全文公開日期 本全文未授權公開 (校外網路)
    全文公開日期 本全文未授權公開 (國家圖書館：臺灣博碩士論文系統)
    QR CODE