研究生: |
林柏君 Po-Chun Lin |
---|---|
論文名稱: |
整合智慧型電子裝置與智慧型方法於可靠度為中心之斷路器維護研究 Integrating Intelligent Electronic Devices with Intelligent Approach to Assess Reliability-Centered Maintenance of Circuit Breaker |
指導教授: |
辜志承
Jyh-Cherng Gu |
口試委員: |
陳士麟
Shi-Lin Chen 劉志文 Chih-Wen Liu 陳斌魁 Bin-Kwie Chen 黃培華 Pei-Hwa Huang 陳南鳴 Nan-Ming Chen 陳在相 Tsai-Hsiang Chen |
學位類別: |
博士 Doctor |
系所名稱: |
電資學院 - 電機工程系 Department of Electrical Engineering |
論文出版年: | 2014 |
畢業學年度: | 102 |
語文別: | 中文 |
論文頁數: | 106 |
中文關鍵詞: | 層級分析法 、斷路器 、證據理論 、模糊集合理論 、智慧型電子裝置 、可靠度為中心維護 |
外文關鍵詞: | Analytical hierarchy process, Circuit breaker, Evidential reasoning, Fuzzy set theory, Intelligent electronic devices, Reliability-centered maintenance |
相關次數: | 點閱:526 下載:7 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
斷路器是電力系統重要設備之一,在電網中具有控制與保護的雙重作用,其操作狀態直接影響電力系統的操作穩定性和供電可靠性。斷路器在電力系統中主要的角色是能可靠操作及保護系統,對系統進行正常斷電、解聯負載和清除故障等任務。隨著經濟發展斷路器在電力系統中的數量也越來越多,因此對於斷路器的維護管理也變成一個重要課題。
本論文提出一個整合智慧型電子裝置與智慧型方法於可靠度為中心之斷路器維護研究,目前已應用智慧型電子裝置建立一個斷路器狀態監測系統,監測系統中之遠端監控主機,可經由網路連結變電所設備端不同廠製之智慧型電子裝置,透過狀態監測系統蒐集斷路器維護參數相關資訊。將運轉中實際變電所斷路器現場的特性試驗資料、智慧型電子裝置監測資料及運轉維修資料,應用模糊集合理論、層級分析法和證據理論對斷路器進行狀態評估分析。另外蒐集變電所斷路器之重要影響因素,利用專家調查法來建立重要性因素權重計算,並對斷路器進行重要性評估分析。最後藉由斷路器狀態評估和重要性評估的結果進行可靠度為中心維護決策分析。上述決策分析資料可提供維護人員及管理人員對斷路器進行維護實施計畫之參考。
The circuit breaker (CB) is one of the most important equipment in power systems. CB serves as both control and protection equipment and its operating condition is critical to the stability and reliability of power systems. CB must operate reliably to protect power systems as well as to perform tasks such as normal interruption, load disconnection and fault clearing. Circuit breaker maintenance management has become an important topic nowadays as the number of CBs increase with economic growth.
Integrating intelligent electronic devices (IEDs) with intelligent approach to assess reliability-centered maintenance (RCM) of CB is proposed in this paper. A CB condition monitoring system using IEDs has been established in this work. IEDs from different manufacturers in a power substation are linked to the CB condition monitoring system which is built in a remote mainframe through an interconnected network to collect information such as the CB maintenance parameters. Fuzzy set theory (FST), analytical hierarchy process (AHP) and evidential reasoning (ER) are applied to assess the conditions of existing substation CBs by processing their preventive test data, IED monitoring data, operation data and maintenance data. In addition, major influence factors of the substation CBs are collected and processed using an expert investigation method to calculate the weights of the importance factors and to perform importance assessment of CBs. Finally, RCM decisions are made based on the results of CB condition assessment and importance assessment. The data and analysis results may provide valuable information for the maintenance personnel and the management department personnel to schedule CB maintenance planes.
[1] M. Kezunovic, “Smart fault location for smart grids,” IEEE Transactions on Smart Grid, vol. 2, no. 1, pp. 11-22, 2011.
[2] J. Schlabbach and T. Berka, “Reliability-centred maintenance of MV circuit-breakers,” Proceedings of IEEE Conference on Porto Power Tech, pp. 5-10, Porto, Septernber 2001.
[3] G. Balzer, “Condition assessment and reliability centered maintenance of high voltage equipment,” Proceedings of 2005 International Symposium on Electrical Insulating Materials, pp. 259-264, Kitakyushu , June 2005.
[4] X. Feng and M. Kezunovic, “Automated integration of substation IED data to generate event reports for protection engineers,” Proceedings of North American Power Symposium (NAPS) Conference, pp. 1-6, Starkville , Oct. 2009.
[5] J. D. McDonald, “Substation automation IED integration and availability of information,” IEEE Power and Energy Magazine, vol. 1, no. 2, pp. 22-31, 2003.
[6] J. H. Heo, M. K. Kim, G. P. Park, and D. H. Kim, “A reliability-centered approach to an optimal maintenancestrategy in transmission systems using a genetic algorithm,” IEEE Transactions on Power Delivery, vol. 26, no. 4, pp. 2171-2179, Oct. 2011.
[7] A. A. Razi-Kazemi, M. Vakilian, K. Niayesh, and M. Lehtonen, “Priority assessment of online monitoring investment for power system CBs, part I: qualitative-quantitative approach,” IEEE Transactions on Power Delivery, vol. 28, no. 2, pp. 928-938, April 2013.
[8] A. J. Henry and J. A. Nachlas, “An equivalent age model for condition-based maintenance,” Proceedings Reliability and Maintainability Symposium (RAMS), Annual, pp. 1-6, Reno, Jan. 2012.
[9] A. Maity, D. Zaremby, D. McMullen, and J. Gomez, “Automated scheduling using Condition Based Maintenance,” Proceedings of IEEE Conference on Prognostics and Health Management, pp. 1-8, Montreal , June 2011.
[10] H. Johal, and M. J. Mousavi, “Coil current analysis method for predictive maintenance of circuit breakers,” Proceedings of IEEE Conference on Transmission and Distribution, pp.1-7, Chicago, April 2008.
[11] M. Kezunovic, Z. Ren, G. Latisko, D. R. Sevcik, J. Lucey, W. Cook, and E. Koch, “Automated Monitoring and Analysis of Circuit Breaker Operation,” IEEE Transactions on Power Delivery, vol. 20, no. 3, pp. 1910-1918 , 2005.
[12] H. H. Zeineldin, E. F. El-Saadany, M. M. A. Salama, and Z. Wang, “High Voltage Circuit Breaker Modeling for Online Model-Based Monitoring and Diagnosis,” Proceedings of IEEE Conference on Innovations in Information Technology, pp. 317-321, Dubai, Nov. 2007.
[13] S. Strachan, S. Mcarthur, J. Mcdonald, W. Leggat, and A. Campbell, “Providing decision support for the condition-based maintenance ofcircuit breakers through data mining of trip coil current signatures,” IEEE Transactions on Power Delivery, vol. 22, no. 1, pp. 178-186, Jan. 2007.
[14] J. L. Velasquez, R. Villafafila, P. Lloret, L. Molas, A. Sumper, S. Galceran, and A. Sudria, “Development and implementation of a condition monitoring system in a substation,” Proceedings of IEEE Conference on Electrical Power Quality and Utilisation, pp. 1-5, 9-11, Barcelona, Oct. 2007.
[15] K. Miyake, T. Akedani, H. Ota, T. Kumai, T. Nakajima, K. Matsushita, and M. Akazaki,“External diagnosis of gas circuit breaker contact wearing,” Proceedings of IEEE Conference on Russia Power Tech, pp. 1-4, St. Petersburg , June. 2005.
[16] T. Orlowska, G. Balzer, M. Halfmann, C. Neumann, and A. Strnad, “Lifecycle management of circuit breaker by application of reliability centered maintenance,” Cigre 2000 Session, 13-103.
[17] Carl Ohlen, “On-line diagnostics for condition based and reliability centeredmaintenance,”(http://www.stri.se/wwwpublic/GRIDTECH-On-line-Diagnostics.pdf).
[18] 台灣電力公司綜合研究所,「智慧型電子裝置預知維護功能運用於斷路器維護之研究完成報告」,民國一百零一年九月。
[19] 吳進忠,「電力變壓器之可靠度評估與維修週期之規劃」,碩士論文,國立台灣科技大學電機工程系,民國八十二年六月。
[20] 辜志承,楊明達,黃彥霖,林柏君,王政群,廖清榮,「應用IED於設備狀態監測及IEC61850通訊協定評估研究」,台電工程月刊,第751期,第31~51頁,100年3月號。
[21] 王政群,「應用智慧型電子裝置及失效模式與影響分析模糊規則於以電力設備狀態為基礎之維護管理系統」,碩士論文,國立台灣科技大學電機工程系,民國九十九年六月。
[22] 日亞電機股份有限公司,「23kV 氣體絕緣開關設備操作維護說明書」。
[23] 台灣電力公司,「台南區營業處IED發展條件式維護技術測試驗證報告」,民國九十九年十一月。
[24] 台灣電力公司,「台中區營業處IED發展條件式維護技術測試驗證報告」,民國九十九年十二月。
[25] 台灣電力公司,「台東區營業處IED發展條件式維護技術測試驗證報告」,民國九十九年十二月。
[26] 劉純貴,「整合智慧型電子裝置(IED)及監控系統於斷路器之預知性維護」,碩士論文,國立台灣科技大學電機工程系,民國一百零一年六月。
[27] 辜志承,楊明達,黃君維,劉純貴,林柏君,廖清榮,「智慧型電子裝置(IED)應用於斷路器預知性維護之研究」,台電工程月刊,第774期,第24~42頁,102年2月號。
[28] Kurt Lehmann, Lukas Zehnder, and Michael Chapman, “A novel arcing monitoring system for SF6 circuit breakers,” Cigre 2002 Session, 13-301.
[29] G. Dalke, and J. Horak, “Application of Numeric Protective Relay Circuit Breaker Duty Monitoring ,” IEEE Transactions Industry Applications, vol. 41, no. 3, pp. 1118-1124, 2005.
[30] 華城電機股份有限公司http://www.fortune.com.tw/
[31] 亞力電機股份有限公司
http://www.arch-world.com.tw/Company/18495.html
[32] 750/760 Feeder Management Relay Instruction Manual, GE Multilin, 2004.
[33] Multi-Functional Protective Relay with Local Control 7SJ62/64 Manual, Siemens AG, 2009.
[34] Feeder Terminal REF 54_ Technical Reference Manual, ABB, 2005.
[35] SEL-351A Relay Distribution Protection System Instruction Manual, SEL, 2008.
[36] http://www.elipse.com.br/port/index.aspx, accessed July 2011
[37] X. Zhang, and E. Gockenbach, “Component reliability modeling of distributionsystems based on the evaluation of failure statistics,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 14, no. 5, pp. 1183-1191, 2007.
[38] 陳建賢,「氣封絕緣開關運用與維護實務」,電機月刊,第17卷第4期,民國九十六年二月。
[39] 台灣電力公司供電處,「供電單位變電設備運轉維護手冊」,民國九十六年十一月。
[40] IEEE standard of common requirements for high voltage power switchgear rated above 1000 V, IEEE Std. C37.100.1, 2007.
[41] T. L. Saaty, 「The Analytic Hierarchy Process, McGraw-Hill」, New York, NY, USA, 1980.
[42] W. Choi, T. Sarkar, H. Wang, and E. Mokole, “Adaptive processingusing real weights based on a direct data domain least squares approach,” IEEE Transactions on Antennas and Propagation, vol. 54, no. 1, pp. 182-191, Jan. 2006.
[43] C. Lasance, H. Rosten, and J. Parry, “The world of thermal characterizationaccording to DELPHI,” IEEE Transactions on Components, Packaging and Manufacturing Technology PartA, vol. 20, no. 4, pp. 384-398, 1997.
[44] W. Chen, “Quantitative decision-making model for distribution system restoration,” IEEE Transactions on Power System, vol. 25, no. 1, pp. 313-321, 2010.
[45] T. Hideaki, T. Shigeyuki, Y. Daiki, N. Takahide, and Y. Ryuichi, “Multiple criteria assessment of substation conditions by pair-wise comparison of analytic hierarchy process,” IEEE Transactions on Power Delivery, vol. 25, no. 4, pp. 3017–3023,2010.
[46] R. Liao, H. Zheng, S. Grzybowski, L. Yang, Y. Zhang, and Y. Liao, “An integrated decision-making model for condition assessment of power transformers using fuzzy approach and evidential reasoning,” IEEE Transactions on Power Delivery, vol. 26, no. 2, pp. 1111-1118, 2011.
[47] L. A. Zadeh, “Fuzzy sets,” Information and Control, vol. 8, no. 3, pp. 338-353, 1965.
[48] 李允中,王小璠,蘇木春,「模糊理論及其應用」,全華科技圖書股份有限公司,民國九十三年二月。
[49] A. P. Dempster, “A generalization of Bayesian inference,” Journal of the Royal Statistical Society Series B, vol. 32, no. 2, pp. 205-247, 1968.
[50] G. Shafer, “Perspectives on the theory and practice of belief functions,” International Journal of Approximate Reasoning, vol. 3, pp.1-40, 1990.
[51] J. B. Yang, and M. G. Singh, “An evidential reasoning approach for multiple attribute decision making with uncertainty,” IEEE Transactions on Systems, Man and Cybernetics, vol. 24, no. 4, pp. 1-18, 1994.
[52] J. B. Yang, and D. L. Xu, “On the evidential reasoning algorithm formultiple attribute decision making under uncertainty,” IEEE Transactions on Systems, Man and Cybernetics, vol. 32, no. 3, pp. 289-304, 2002.