研究生: |
沈惠麗 Felicia - Januarlia Novita |
---|---|
論文名稱: |
甲酸反應蒸餾製程之不同熱整合設計研究 Heat-Integrated Design of Formic Acid Production via Reactive Distillation Configuration |
指導教授: |
李豪業
Hao-Yeh Lee |
口試委員: |
李明哲
Ming-Jer Lee 王聖潔 San-Jang Wang |
學位類別: |
碩士 Master |
系所名稱: |
工程學院 - 化學工程系 Department of Chemical Engineering |
論文出版年: | 2013 |
畢業學年度: | 101 |
語文別: | 英文 |
論文頁數: | 132 |
中文關鍵詞: | heat-integrated 、formic acid production 、reactive distillation 、thermally coupled 、external heat integration |
外文關鍵詞: | heat-integrated, formic acid production, reactive distillation, thermally coupled, external heat integration |
相關次數: | 點閱:317 下載:7 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
The heat-integrated design of formic acid production via reactive distillation (RD) configuration will be investigated in this thesis. The design for this process refers to Huang’s process and it is optimized to obtain a better process design that has the minimum total energy. Later on, design which is optimized will be used as reference by the other configuration to reduce the “remixing effects” phenomena which may occur. The first approach is the thermally coupled configuration. As the results, the “remixing effects” can be reduced and minimum total energy less than the base case and optimization design can also be achieved. This research also investigates another heat-integrated method. It is external heat integration which uses the heat of top distillate vapor in one column to transfer the heat to side heater and/or to the reboiler of another column. The results for this method are better than the thermally coupled one because the total energy can be further reduced compared to thermally coupled design.
The heat-integrated design of formic acid production via reactive distillation (RD) configuration will be investigated in this thesis. The design for this process refers to Huang’s process and it is optimized to obtain a better process design that has the minimum total energy. Later on, design which is optimized will be used as reference by the other configuration to reduce the “remixing effects” phenomena which may occur. The first approach is the thermally coupled configuration. As the results, the “remixing effects” can be reduced and minimum total energy less than the base case and optimization design can also be achieved. This research also investigates another heat-integrated method. It is external heat integration which uses the heat of top distillate vapor in one column to transfer the heat to side heater and/or to the reboiler of another column. The results for this method are better than the thermally coupled one because the total energy can be further reduced compared to thermally coupled design.
1) Agrawal, R.; Fidkowski, Z. T., Are Thermally Coupled Distillation Columns Always Thermodynamically More Efficient for Ternary Distillations?, Ind. Eng. Chem. Res., 1998, 37, 3444 - 3454.
2) Avila, J. R. A.; Hasebe, S., New Synthesis Procedure to Find the Optimal Distillation Sequence with Internal and External Heat Integrations, Ind. Eng. Chem. Res., 2013, 52, 4851 - 4862.
3) Bai, L.; Zhao, Y.; Hu, Y.; Zhong, B.; Peng, S., Kinetics of the Carbonylation of Methanol in a Mechanically Agitated Reactor, J. of Nat. Gas Chem., 1996, 5 (3), 229 - 236.
4) Bezenehtak, K.; Combes, G.; Dehghani, F.; Foster, N.; Tomasko, D., Vapor-Liquid Equilibrium for Binary Systems of Carbon Dioxide + Methanol, Hydrogen + Methanol, and Hydrogen + Carbon Dioxide at High Pressures, J. Chem. Eng. Data., 2002, 47, 161 - 168.
5) Caballero, J. A., Thermally Coupled Distillation, 10th International Symposium on Process Systems Engineering - PSE2009., 2009, 59 - 64.
6) Doherty, M.; Perkins, J., On the Dynamics of Distillation Process. I. The Simple Distilation of Multicomponent Non - Reacting, Homogeneous Liquid Mixtures, Chem. Eng. Sci., 1978, 33, 359 - 578.
7) Dunnebier, G.; Pantelides, C., Optimal Design of Thermally Coupled Distillation Columns, Ind. Eng. Chem. Res., 1999, 38, 162 - 176.
8) En.wikipedia.org, 2009., Formic acid - Wikipedia, the free encyclopedia. [online] Available at http://en.wikipedia.org/wiki/Formic_acid.
9) Fidkowski, Z.; Krolikowski, L., Thermally Coupled System of Distillation Columns; Optimization Procedure, AIChE J., 1986, 32 (4), 537 - 546.
10) Gadalla, M. A., Internal Heat Integrated Distillation Columns (iHIDiCs) - New Systematic Design Methodology, Chem. Eng. Res. Des., 2009, 87, 1658 - 1666.
11) Harwardt, A.; Marquardt, W., Heat-Integrated Distillation Columns : Vapor Recompression or Internal Heat Integration?, AIChE J., 2012, 58 (12), 3740 – 3750.
12) Hirata, K., Heat Integration of Distillation Column, Chemical Engineering Transactions., 2009, 18, 39 - 44 (DOI : 10.3303/CET0918004).
13) Huang, H. P.; Lee, M. J.; Lee, H. Y.; Chen, J. H., Formic Acid Manufacturing System and Method of Manufacturing Formic Acid, Patent Application Publication., 2012, US2012/0123157 A1.
14) Hung, S. B.; Chen, J. H.; Lin, Y. D.; Huang, H. P.; Lee, M. J.; Ward, J. D.; Yu, C. C., Control of Plant wide Reactive Distillation Processes: Hydrolysis, Transesterification and Two-Stage Esterification, J. of the Taiwan Ins. of Che. Eng., 2010, 41, 382 - 402.
15) Ihs.com. n.d., 2013, Chemicals Industry Solutions | IHS. [online] Available at: http:// http://www.ihs.com/products/chemical/planning/ceh/formic-acid.aspx.
16) Indu, B.; Ernst, W.; Gelbaum, L., Methanol-Formic Acid Esterification Equilibrium in Sulfuric Acid Solutions: Influence of Sodium Salts, Ind. Eng. Chem. Res., 1993, 32, 981-985.
17) Js-hengmao.com., 2012, Jiangsu Hengmao Machinery Manufacture Co,.Ltd. [online] Available at: http://www.hengmaomachinery.com/news/3526.html.
18) Lee, H. Y.; Lee, Y. C.; Chien, I. L.; Huang, H. P., Design and Control of a Heat-Integrated Reactive Distillation System for the Hydrolysis of Methyl Acetate, Ind. Eng. Chem. Res., 2010, 49, 7398 - 7411.
19) Leonard, J. D., Preparation of Formic Acid by Hydrolysis of Methyl Formate, United State Patent., 1981, 4.299.981.
20) Lin, Y. D.; Chen, J. H.; Cheng, J. K.; Huang, H. P.; Yu, C. C., Process Alternatives for Methyl Acetate Conversion using Reactive Distillation. 1. Hydrolysis, Chem. Eng. Sci., 2008, 63, 1668 - 1682.
21) Liu, Q.; Takemura, F.; Yabe, A., Solubility and Diffusivity of Carbon Monoxide in Liquid Methanol, J. Chem. Eng. Data., 1996, 41, 589 - 592.
22) Luyben, W. L., Design and Control of a Fully Heat - Integrated Pressure - Swing Azeotropic Distillation System, Ind. Eng. Chem. Res., 2008, 47, 2681 - 2695.
23) Luyben, W., Distillation Design and Control Using Aspen Simulation; John Wiley & Sons, Inc; New Jersey, 2006.
24) Luyben, W.; Yu, C., Reactive Distillation Design and Control; John Wiley & Sons, Inc; New Jersey, 2008.
25) Lynn. J. B.; Homberg, O. A.; Singleton, A. H., Formic Acid Synthesis by Lower Alkyl Formate Hydrolysis, United State Patent., 1973, 3.907.884.
26) Mahajan, D.; Slegeir, W. A.; Sapienza, R. S.; O’Hare. T. E., Low Temperature Synthesis of Methyl Formate, United State Patent., 1985, 4.613.623.
27) Mai, P.; Vu, T.; Mai, K., Analysis of Temperature Effects on Ester Hydrolysis Reactions in a Fixed-Bed Chromatographic Reactor, Ind. Eng. Chem. Res., 2004, 43, 4691.
28) Nguyen, N.; Demirel, Y., Using Thermally Coupled Reactive Distillation Columns in Biodiesel Production, Energy., 2011, 36, 4838 - 4847.
29) Noeres, C.; Kenid, E. Y.; Gorak, A., Modelling of Reactive Separation Processes: Reactive Absorption and Reactive Distillation, Chem. Eng. Process., 2003, 42, 157 - 178.
30) Polak, J.; Lu, B. C. Y., Excess Gibbs Free Energies and Excess Volumes of Methyl Formate + Methanol and Methyl Formate + Ethanol at 298.15 K, J. Chem. Thermodyn., 1972, 4, 469 - 476.
31) Smith, R., Chemical Process Design and Integration; John Wiley & Sons Ltd; Chichester, 2005.