研究生: |
陳信豪 Xin-Hao Chen |
---|---|
論文名稱: |
ISO 14443 Type A 標籤模擬器研製 Study and Implementation on ISO 14443 Type A Tag Emulator |
指導教授: |
劉馨勤
Hsin-Chin Liu |
口試委員: |
楊承發
Chang-Fa Yang 張立中 Li-Chung Chang 黃紹華 Shao-Hua Huang 劉馨勤 Hsin-Chin Liu |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電機工程系 Department of Electrical Engineering |
論文出版年: | 2017 |
畢業學年度: | 105 |
語文別: | 中文 |
論文頁數: | 74 |
中文關鍵詞: | 無線射頻辨識 、讀取器 、標籤模擬系統 、ISO 14443 |
外文關鍵詞: | Tag emulator, ISO 14443 |
相關次數: | 點閱:242 下載:5 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
RFID技術早已應用於諸多領域中,悠遊卡即為根據ISO 14443 Type A規範下的應用之一,其所使用的頻段為高頻(HF),並藉由讀取器與標籤天線之間的互感效應來傳送訊號;在日常生活中隨處可見悠遊卡的使用,因此為了使此技術能更加便利的使用,查驗訊號品質的流程與技術是非常值得考量的一部分。為了達到
此目的,便需要有完整且具理論分析的模擬系統,透過此模擬系統來分析當讀取器與卡片在通訊時改變不同的參數對其效能的影響。
本論文實現之模擬系統使用美商國家儀器公司(National Instrument, NI)所開發之向量收發器(Vector Signal Transceiver, VST)實現可解讀ISO 14443 Type A讀取器以及標籤訊號之讀取器、卡片模擬器。讀取器、卡片模擬器均可控制發射端之功率、載波頻率以及各段指令的回傳延遲時間等參數,以驗證各參數對通訊的影響;而基頻訊號處理的部分主要撰寫於FPGA上,藉此實現即時(real time)的模擬系統,HOST部分則負責顯示接收到的波形以及訊號處理的結果
RFID technology has long been used in many areas recently. Easycard based on the ISO 14443 Type A protocol is one of the applications. ISO 14443 Type A RFID technology uses high frequency and mutual inductance between the reader antenna and tag antenna to transmit signal. We can see the use of easycard everywhere in our daily life, in order to use the technology more conveniently, it is important to consider how to measure the quality of communication between reader and tag. Thus, we need to design a system to simulate both reader and tag behaviors, so we can change different parameters and analyze how they affect the system performance.
In this work, we used National Instrument’s Vector Signal Transceiver (VST) to implement an ISO 14443 Type A tag and reader emulator system. The emulator system can control its output power, carrier frequency and frame delay time between each command to verify the impact of these parameters. In which the baseband signal processing is implemented in FPGA so that the system can be a real time system; meanwhile, the received waveform and decoded results are shown by an industrial PC.
[1] X. Zhu, S. K. Mukhopadhyay, and H. Kurata, "A review of RFID technology and its managerial applications in different industries," Journal of Engineering and Technology Management, vol. 29, pp. 152-167, 2012.
[2] K. Finkenzeller, RFID Handbook:Fundamentals and Applications in Contactless Smart Cards and Identification, Second ed.: John Wiley & Sons, 2003.
[3] 陳冠儒, "ISO 14443 Type A 軟體無線電射頻辨識讀取器研製," 碩士論文, 國立台灣科技大學電機工程研究所, 2015.
[4] "International standard ISO/IEC 14443 -1-2-3," International Standardization Organization, April 2003.
[5] M. Shakiba, A. Zavvari, N. Aleebrahim, and M. J. Singh, "Evaluating the academic trend of RFID technology based on SCI and SSCI publications from 2001 to 2014," Scientometrics, vol. 109, pp. 591-614, 2016.
[6] C. Nak-Gwon, L. Hyuek-Jae, L. Sang-Hoon, and K. Seong-jeen, "Design of a 13.56 MHz RFID system," in 2006 8th International Conference Advanced Communication Technology, 2006, pp. 4 pp.-843.
[7] M. W. Seo, Y. C. Choi, Y. H. Kim, and H. J. Yoo, "A 13.56MHz RFID transceiver SoC for multi-standard reader," in 2009 IEEE Radio and Wireless Symposium, 2009, pp. 75-78.
[8] P. V. Nikitin and K. V. S. Rao, "LabVIEW-Based UHF RFID Tag Test and Measurement System," IEEE Transactions on Industrial Electronics, vol. 56, pp. 2374-2381, 2009.
[9] 汪曉慧, "ISO 14443B射頻標籤一致性檢測技術與系統實現," 碩士論文, 東南大學, 2015.
[10] L. Biao, H. Ai-qun, and Q. Zhong-yuan, "Trends and Brief Comments on Anti-collision Techniques in Radio Frequency Identification System," in 2006 6th International Conference on ITS Telecommunications, 2006, pp. 241-245.
[11] M. Djeddou, R. Khelladi, and M. Benssalah, "Improved RFID anti-collision algorithm," AEU - International Journal of Electronics and Communications, vol. 67, pp. 256-262, 2013.
[12] M. A. Khan, M. Sharma, and P. R. Brahmanandha, "FSM based Manchester encoder for UHF RFID tag emulator," in 2008 International Conference on Computing, Communication and Networking, 2008, pp. 1-6.
[13] S. S. Parhi, P. Venkateswaran, and R. Nandi, "Design and FPGA verification of HF RFID transponder," in 2012 International Conference on Communications, Devices and Intelligent Systems (CODIS), 2012, pp. 421-424.
[14] A. K. Jones, R. R. Hoare, S. R. Dontharaju, S. Tung, R. Sprang, J. Fazekas, et al., "A Field Programmable RFID Tag and Associated Design Flow," in 2006 14th Annual IEEE Symposium on Field-Programmable Custom Computing Machines, 2006, pp. 165-174.
[15] K. Finkenzeller, F. Pfeiffer, and E. Biebl, "Range Extension of an ISO/IEC 14443 type A RFID System with Actively Emulating Load Modulation," in RFID SysTech 2011 7th European Workshop on Smart Objects: Systems, Technologies and Applications, 2011, pp. 1-10.
[16] K. Finkenzeller, "Battery powered tags for ISO/IEC 14443, actively emulating load modulation," in RFID SysTech 2011 7th European Workshop on Smart Objects: Systems, Technologies and Applications, 2011, pp. 1-8.
[17] F.Xiong, Digital modulation techniques, Artech House, 2006.
[18] F. Fuschini, C. Piersanti, F. Paolazzi, and G. Falciasecca, "On the Efficiency of Load Modulation in RFID Systems Operating in Real Environment," IEEE Antennas and Wireless Propagation Letters, vol. 7, pp. 243-246, 2008.
[19] C. Angerer, "A digital receiver architecture for RFID readers," in 2008 International Symposium on Industrial Embedded Systems, 2008, pp. 89-94.
[20] J.-H. Bae, W. Choi, C.-W. Park, C.-S. Pyo, and K.-T. Kim, "Design of Reader Baseband Receiver Structure for Demodulating Backscattered Tag Signal in a Passive RFID Environment," ETRI Journal, vol. 34, pp. 147-158, 2012.
[21] N. Instruments. (2014). NI PXIe-5641R Product In-Depth. Available: http://www.ni.com/product-documentation/8786/en/
[22] D. R. Novotny, J. R. Guerrieri, M. Francis, and K. Remley, "HF RFID electromagnetic emissions and performance," in 2008 IEEE International Symposium on Electromagnetic Compatibility, 2008, pp. 1-7.
[23] Understanding and Using Cyclic Redundancy Checks. Available: https://www.maximintegrated.com/en/app-notes/index.mvp/id/27