本論文主要探討對品質管制(Quality Control)的發展，同時對統計製程管制(Statistical Process Control)與製程能力(Process Capability)做概要至全面性的介紹。經由全面性之介紹，進而探討計數值管制圖(Control Chart for Attributes)的原理與架構，並藉由Visual Basic程式開發軟體，發展出一套電腦中文化之計數值管制圖資訊系統。
管制圖若使用傳統人工作業方式，除了造成人為疏失的可能性外，還需要許多時間去繪製管制圖。將計數值管制圖資訊電腦化，可以增加管制圖的準確度，尚可以在很短的時間內解決資料整理與儲存問題，此經由Visual Basic所開發的軟體，可以使用於一般個人電腦上，因為是中文化的設計介面，所以使用者可以很快的學會操作方式，達到有效率的工作模式。

The thesis mainly confers the development of Quality Control and simultaneously makes outline introduction of the complete Statistical Process Control and Process Capability. Via the comprehensive introduction, and then probes into principle and skeleton of Attributes Control Charts. To create a information system of Attributes Control Charts (in Chinese) by the means of the Visual Basic program language. Through the traditional artificial manner, the calculation and drawing of the Attributes Control Charts can not only cause the possibility of artificial careless mistake, but also draw the charts to spend a number of times.
Expressing the Attributes Control Charts for computerization, the charts not only increase the accuracy that in charge of making charts, but also solve the software collating data and saving question in a short period of time. The software that was built by Visual Basic can apply to general P.C. system. The user can operate and achieve efficient working model as soon as possible because of Chinese Window interface.

1.徐世輝，「品質管理」，三民書局，民國八十五年。
2.徐世輝，「品質管制」，華泰書局，民國九十六年。
3.徐世輝，「全面品質管制」，華泰書局，民國八十八年。
4.劉漢容，「品質管理」，勝凱企業管理顧問公司，民國八十九年。
5.陳耀茂，「品質管理」，五南圖書出版公司，民國八十三年。
6.戴久永，「品質管理」，三民書局，民國八十年。
7.房克成，「管制圖」，中華民國品質管制學會，民國八十三年。
8.QC手法研究小組，「簡單易懂好用的QC手法」，先鋒企業管理發展中心，民國八十年。
9.簡聰海、許總鑫、蔡志弘，「品質管理」，全威圖書有限公司，民國八十八年。
10.鄭春生，「品質管理 修訂版」，育友圖書有限公司，民國九十四年。
11.王國榮，「Visual Basic 6.0資料庫程式設計」，旗標出版社，民國九十年。
12.王國榮，「新觀念的Visual Basic 6.0本」，旗標出版社，民國八十九年。
13.王國榮，「Visual Basic 6.0實戰講座」，旗標出版社，民國九十二年。
14.陳正義、何坤鑫，「Visual Basic程式設計與圖形監控應用」，湌海書局，民國九十一年。
15.彭明柳，「Visual Basic 6.0中文專業版徹底研究」，博碩文化，民國九十年。
16.Garvin, D. “What Does‘Product Quality’Really Mean？” Sloan Management Review , Fall 1984, p.25-43
17.A. Parasuraman, V. Zeithamel, and L. Berry, “A Conceptual Model of Service Quality, ” Marketing Science Institute(1984)：p.84-106.
18.Ferdows, K., and Demeyer, A., “Lasting Improvement in Manufacturing Performance：In Search of New Theory, ” Journal of Operations Management 9,no.2(1990)：p168-184
19.Tellis, G., and Fornell, C., “The Relationship between Advertising and Product Quality over the Product Life Cycle：A Contingency Theory, ” Journal of Marketing Research25, (1988)：p64-71.
20.Griffin, A., and Hauser, J., “The Voice of Customer, ” Marketing Science 12, no. 1(1993)：p1-26.
21.Costigan, R., “Adaptation of Tradition Human Resources Processes for Total Quality Environments, ” Quality Management Journal 2, no. 3(1997)：p7-24
22.Shannon, P., “The Value Added Ratio, ” Quality Progress 30, no. 3(1997)：p94-97
23.Yeong-Dong Hwang, “The practices of integrating manufacturing execution systems and Six Sigma methodology, ” Int J Adv Manuf Technol (2006)31：p145-154
24.Juran, J. M., Quality Control Handbook, 3rd ed., MacGraw-Hill, 1974.
25.Donna C. S. Summers, ”Quality Control,” Prentice-Hall Inc (1997)
26.Lloyd S. Nelson, ”Notes on the Shewhart Control Chart,” Journal of Quality Technology, Vol. 31, No. 1, January 1999, pp. 124-131.
27.Hutchins Greg, ”Introduction to Quality Management, Assurance and Control,” Macmillan Publishing Company (1991).
28.Susan M. Garrity, ”Basic Quality Improvement,” Prentice-Hall Inc (1993).
29.Richard E. DeVor, Tsong-how Chang, John W. Sutherland,” Statistical Quality Design and Control「Contemporary Concepts and Methods」,” Prentice-Hall Inc (1992).
30.Douglas C. Montgomery, ”Introduction to Statistical Quality Control,” WILEY (2005).
31.Haim Shore, ”General Control Charts for Attributes, ” IIE Transactions (2000)32 : p1149-1160
32.M. P. Gadre, R. N. Rattihalli, ”Likelihood Ratio Based Multi-Attribute Control Chart, ” International Journal of Reliability, Quality and Safety Engineering, Vol. 12, No. 2 (2005) : p149-166
33.Ihsan Kaya, Orhan Engin, ”A New Approach to Define Sample Size at Attributes Control Chart in Multistage Processes : An Application in Engine Piston Manufacturing Process, ” Journal of Materials Processing Technology 183 (2007) : p38-48
34.Pakorn Adulbhan, John C. S. Tang, Rein Boondiskulchok, ”Design of Attribute Control Charts for Multistage Production Systems-Based on Cost Criteria, ” Comput & Indus. Engng Vol. 7, No. 2 (1983) : p79-99
35.Michael Hamada, ”Bayesian Tolerance Interval Control Limits for Attributes, ” Quality and Reliability Engineering International, Qual. Reliab. Engng. Int. 18 (2002) : p45-52