研究生: |
黃鉦淯 Jheng-Yu Huang |
---|---|
論文名稱: |
工業時效性網路路由演算法設計與排程器開發 The Design of the Routing Algorithm and the Scheduler for Industrial Time-Sensitivity Networking |
指導教授: |
沈中安
Chung-An Shen |
口試委員: |
沈中安
Chung-An Shen 金台齡 Tai-Lin Chin 沈上翔 Shan-Hsiang Shen 黃琴雅 Chin-Ya Huang 許名宏 Ming-Hung Hsu |
學位類別: |
碩士 Master |
系所名稱: |
電資學院 - 電子工程系 Department of Electronic and Computer Engineering |
論文出版年: | 2020 |
畢業學年度: | 108 |
語文別: | 英文 |
論文頁數: | 61 |
中文關鍵詞: | IEEE 802.1Qbv 、時間敏感網路 、Time-triggered flow排程與路由 、排程計算時間 、可排程性 |
外文關鍵詞: | IEEE 802.1Qbv, Time-sensitive Networking, Time-triggered flow scheduling and routing, Scheduling computation time, Schedulability |
相關次數: | 點閱:182 下載:0 |
分享至: |
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報 |
[1] J. Guck, A. Van Bemten and W. Kellerer, “DetServ: Network models for real-time QoS provisioning in SDN-based industrial environments”, in IEEE Transactions on Network and Service Management, vol. 14, no. 4, Dec. 2017 , pp. 1003-1017.
[2] E. Schweissguth, P. Danielis, D. Timmermann, H. Parzyjegla, and G. Mühl, “ILP-based joint routing and scheduling for time-triggered networks,” in Proc. Int. Conf. Real-Time Netw. Syst. (RTNS), 2017, pp. 8-17.
[3] J. Åkerberg, M. Gidlund, and M. Björkman, “Future research challenges in wireless sensor and actuator networks targeting industrial automation,” in Proc. 9th Int. Conf. Ind. Inf., Lisbon, Portugal, 2011, pp. 410-415.
[4] E. Schweissguth, P. Danielis, C. Niemann, and D. Timmermann, “Application-aware industrial Ethernet based on an SDN-supported TDMA approach,” in Proc. World Conference on Factory Communication Systems (WFCS), Aveiro, Portugal, 2016, pp. 1-8.
[5] F. Dürr and N. G. Nayak, “No-wait packet scheduling for IEEE timesensitive networks (TSN),” in Proc. ACM Int. Conf. Real Time Netw. Syst., Brest, France, 2016, pp. 203-212
[6] V. Gavriluţ, L. Zhao, M. L. Raagaard and P. Pop, “AVB-aware routing and scheduling of time-triggered traffic for TSN,” in IEEE Access, vol. 6, 2018, pp. 75229-75243.
[7] M. D. J. Teener, A. N. Fredette, C. Boiger, P. Klein, C. Gunther, D. Olsen, and K. Stanton, “Heterogeneous networks for audio and video: Using IEEE 802.1 audio video bridging,” in Proceedings of the IEEE, vol. 101, no. 11, Nov. 2013, pp. 2339-2354.
[8] A. Nasrallah, A. S. Thyagaturu, Z. Alharbi, C. Wang, X. Shao, M. Reisslein, and H. ElBakoury, “Ultra-low latency (ULL) networks: The IEEE TSN and IETF DetNet standards and related 5G ULL research,” in IEEE Communications Surveys & Tutorials, vol. 21, no. 1, Firstquarter 2019, pp. 88-145.
[9] V. Gavriluţ and P. Pop, “Scheduling in time sensitive networks (TSN) for mixed-criticality industrial applications,” in IEEE International Workshop on Factory Communication Systems (WFCS), Imperia, 2018, pp. 1-4.
[10] S. S. Craciunas, R. S. Oliver, M. Chmelík, and W. Steiner, “Scheduling real-time communication in IEEE 802.1Qbv time sensitive networks,” in Proc. ACM Int. Conf. Real Time Netw. Syst., Brest, France, 2016, pp. 183-192.
[11] M. Pahlevan, N. Tabassam, and R. Obermaisser, “Heuristic list scheduler for time triggered traffic in time sensitive networks,” ACM SIGBED Review, vol. 16, no.1, 2019, pp. 15-20.
[12] M. Pahlevan and R. Obermaisser, “Genetic algorithm for scheduling time-triggered traffic in time-sensitive networks,” in International Conference on Emerging Technologies and Factory Automation (ETFA), vol. 1, 2018, pp. 337-344.
[13] N. G. Nayak, F. Dürr, and K. Rothermel. “Routing algorithms for IEEE802. 1Qbv networks.” ACM SIGBED Review, vol. 15, no. 3, June 2018, pp. 13-18.
[14] N. G. Nayak, F. Dürr and K. Rothermel, "Incremental flow scheduling and routing in time-sensitive software-defined networks," in IEEE Transactions on Industrial Informatics, vol. 14, no. 5, May 2018, pp. 2066-2075.
[15] G. J. Cheng, L. T. Liu, X. J. Qiang and Y. Liu, “Industry 4.0 development and application of intelligent manufacturing,” International Conference on Information System and Artificial Intelligence (ISAI), Hong Kong, 2016, pp. 407-410.
[16] M. Sony, “Industry 4.0 and lean management: a proposed integration model and research propositions,” Production & Manufacturing Research, vol. 6, no. 1, 2018, pp. 416-432.
[17] Y. Lu, “Industry 4.0: A survey on technologies, applications and open research issues,” Journal of Industrial Information Integration, vol. 6, 2017, pp. 1-10.
[18] D. Ivanov, A. Dolgui, B. Sokolov, F. Werner, and M. Ivanova, “A dynamic model and an algorithm for short-term supply chain scheduling in the smart factory industry 4.0,” International Journal of Production Research, vol. 54, no. 2, 2016, pp. 386-402.
[19] J. Y. Yen,“Finding the K shortest loopless paths in a network,” Management Science, vol. 17, no. 11, 1971, pp. 712-716.
[20] M. Ojewale and P. M. Yomsi. “Routing heuristics for load-balanced transmission in TSN-based networks,” in International Workshop on Real-Time Networks, Stuttgart, Germany, July 2019.
[21] Institute of Electrical and Electronics Eingenieers, “802.1Qcc Stream Reservation Protocol (SRP) Enhancements and Performance Improvements,” IEEE P802.1Qcc/D2.0, 2017.
[22] E. W. Dijkstra, “A note on two problems in connexion with graphs,” NumerischeMathematik 1, 1959, pp. 269-271.
[23] L. De Moura and N. Bjørner, “Z3: An efficient SMT solver.” in International conference on Tools and Algorithms for the Construction and Analysis of Systems, vol. 4963, 2008, pp. 337-340.
[24] E. Kucera, O. Haffner, P. Drahoš, and Š. Kozák, “Emerging technologies for Industry 4.0: OPC unified architecture and virtual / mixed reality,” in International conference on applied informatics in future ICT, 2018, pp. 57-62.
[25] P. Drahoš, E. Kucera, O. Haffner, and E. Stark, “Industrial Communication and Industry 4.0,” in International conference on applied informatics in future ICT, 2018, pp. 40-44.