簡易檢索 / 詳目顯示

研究生: 楊竣堯
CHUN-YAO YANG
論文名稱: 以Creo Toolkit開發伺服器傳輸線佈置系統
Developing a Cable Layout System Using Creo Toolkit
指導教授: 林清安
Ching-An Lin
口試委員: 鄭逸琳
Yih-Lin Cheng
謝文賓
Win-Bin Shieh
學位類別: 碩士
Master
系所名稱: 工程學院 - 機械工程系
Department of Mechanical Engineering
論文出版年: 2019
畢業學年度: 107
語文別: 中文
論文頁數: 90
中文關鍵詞: 佈線設計3D CAD二次開發避障
外文關鍵詞: Routing design, 3D CAD, Application programming interface, Obstacle avoidance
相關次數: 點閱:230下載:0
分享至:
查詢本校圖書館目錄 查詢臺灣博碩士論文知識加值系統 勘誤回報
  • 目前伺服器中的佈線設計需透過使用者於3D設計軟體建立大量的參考特徵以及反覆調整特徵參數進行模擬,接著利用完成的傳輸線CAD模型判斷設計上的合理性,確保傳輸線能順利通過伺服器內的空間狹窄處。為了提升佈線設計之效率以及避免設計結果與預期不符,本研究透過二次開發工具Creo Toolkit建立一套伺服器佈線系統,預先檢測佈線設計的可行性,並自動化建立佈線設計所需的特徵,以減少使用者操作步驟。
    本研究開發之伺服器佈線系統是以矩形排列最佳化方式確保欲進行佈線設計的傳輸線能通過伺服器內的空間狹窄處,並透過Creo Toolkit與本研究提出之避開障礙的機制幫助使用者快速建立路徑點、佈線路徑與傳輸線模型,同時提供動態調整功能,應付佈線設計過程中常有的設計變更,最後利用3D幾何模型中的線長資訊,從資料庫篩選出可用的傳輸線型號,完成佈線設計之工作。
    本論文除了說明佈線路徑的建立原理與避開障礙的機制外,並以伺服器中常用的傳輸線類型(圓線、扁線與多接頭傳輸線)作為實例,進行佈線模擬與建立實體模型,驗證所開發系統的實用性。


    The typical process of cable routing for a computer server relies on the user to set up the reference geometry and constantly adjust parameters in 3D CAD software. The 3D CAD model is then used to examine the routing design to prevent the interference during assembly. In order to improve the design efficiency and avoid the unpredictable consequence, this study establishes a Creo Toolkit-based server cable routing system to inspect the routing design before creating cable’s 3D CAD model, and automatically set up necessary geometric features to reduce user’s operations.
    The server cable routing system ensures the cables can pass through narrow space inside a server by optimal allocation of cable areas in a rectangle. An obstacle avoidance algorithm is also proposed and Creo Toolkit is used to implement the algorithm. The developed system allows a user to rapidly create the reference points passing through by a cable. The cabling path and cable’s 3D CAD model are then generated automatically. It also provides the function of dynamic adjustment to cope with constant design changes of cable routing. Finally, the cable length can easily be calculated by cable’s 3D CAD model, and appropriate cable types can be found from the cable database.
    This thesis not only addresses the method of cable routing and the mechanism of obstacle avoidance, but also takes common cable types (round-shape cable, flat-shape cable and multi-connector cable) to implement the proposed methodology in order to verify the applicability of the developed system.

    摘要I AbstractII 誌謝IV 目錄V 圖目錄VIII 表目錄XIII 第一章 緒論1 1.1 研究動機與目的1 1.2 研究方法4 1.3 文獻探討5 1.4 論文架構10 第二章 開發工具與傳輸線介紹11 2.1 Creo Toolkit簡介11 2.2 Creo Toolkit建立特徵方法11 2.2.1 特徵元素樹法11 2.2.2 使用者定義特徵法13 2.3 傳輸線種類19 2.4 佈線設計流程21 第三章 佈線空間限制檢查23 3.1 佈線通道截面定義23 3.2 佈線通道檢測原理28 第四章 佈線路徑與傳輸線模型建立31 4.1 傳輸線模型檔32 4.2 佈線路徑35 4.2.1 起點與終點的定義35 4.2.2 路徑點建立36 4.2.3 路徑曲線建立38 4.2.4 束點建立41 4.3 避障機制42 4.3.1 干涉點的取得42 4.3.2 繞線原理45 4.4 線材實體建立49 4.4.1 圓線50 4.4.2 扁線51 4.5 路徑設計變更57 第五章 實例驗證59 5.1 佈線系統介面59 5.1.1 通道檢測介面59 5.1.2 佈線介面60 5.2 實例一61 5.2.1 通道檢測62 5.2.2 佈線設計64 5.3 實例二67 第六章 結論與未來研究方向71 6.1 結論71 6.2 未來研究方向72 參考文獻73

    [1]Burke, E.K., Kendall, G. and Whitwell, G. (2004), “A new placement heuristic for the orthogonal stock-cutting problem,” Operations Research, Vol. 52, No. 4, pp. 655-671.
    [2]Jukka, J.(2010), “A thousand ways to pack the bin - a practical approach to two-dimensional rectangle bin packing,” retrived from http://clb. demon. fi/files/RectangleBinPack. pdf.
    [3]黃寶翰,「具擴充性之特徵管理系統的Pro/Toolkit程式開發」(2011),碩士論文,台灣科技大學機械工程系,台北市。
    [4]Fan, Q.M., Liu, G. and Wang, W. (2011), “Development of Die Sets standard parts library based on Pro/E,” Procedia Engineering, Vol. 15, pp. 3802-3807.
    [5]康嘉宏,「重疊扇葉無干涉脫模之Pro/Toolkit程式開發與模仁製作」(2005),碩士論文,台灣科技大學自動化及控制研究所,台北市。
    [6]陳志文,「連續沖模之模座設計與動態模擬之Pro/Toolkit程式開發」(2005),碩士論文,台灣科技大學機械工程系,台北市。
    [7]鞠傳海、郭宇、王發麟、吳保勝(2016),「基於離散點距離的三維線纜干涉檢測算法」,南京航空航天大學學報,第48卷第6期,856-863。
    [8]Lv, N., Liu, J., Ding, X. and Lin, H. (2017), “Assembly simulation of multi-branch cables,” Journal of Manufacturing Systems, Vol. 45, pp. 201-211.
    [9]Kabul, I., Gayle, R. and Lin, M.C. (2007), “Cable route planning in complex environments using constrained sampling,” SPM 2007: ACM Symposium on Solid and Physical Modeling, June 4-6, Beijing, China.
    [10]Pro/TOOLKIT User’s Guide (2009), Parametric Technology Corporation, Needham, MA, USA.
    [11]王文波(2010),Pro/E Wildfire 4.0 二次開發實例解析,清華大學出版社,北京。
    [12]李世國(2003),Pro/TOOLKIT程序設計,機械工業出版社,北京。
    [13]林清安(2006),Pro/ENGINEER 野火3.0 零件設計 進階(上),旗標出版股份有限公司,台北。
    [14]林清安(2006),Pro/ENGINEER 野火3.0 零件設計 進階(下),旗標出版股份有限公司,台北。
    [15]https://community.ptc.com/t5/Customization/bd-p/customization

    無法下載圖示 全文公開日期 2024/01/29 (校內網路)
    全文公開日期 本全文未授權公開 (校外網路)
    全文公開日期 本全文未授權公開 (國家圖書館:臺灣博碩士論文系統)
    QR CODE